Si consideri un tubo rigido del ponteggio, fissato nella parte inferiore utilizzando il vincolo esterno del ponteggio e caricato sia da un momento che da una forza. Calculate the maximum deflection with consideration of initial slippage.
Questo esempio di verifica si basa sull'esempio di verifica 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Determina l'inflessione massima e il momento radiale massimo di una piastra circolare semplicemente supportata soggetta a pressione uniforme, temperatura uniforme e temperatura differenziale.
L'esempio di verifica descrive i carichi del vento in diverse direzioni del vento su un modello di un gruppo di edifici. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
Si consideri un tubo rigido del ponteggio, fissato nella parte inferiore utilizzando il vincolo esterno del ponteggio e caricato sia da un momento che da una forza. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Una trave lunga e sottile trasporta una massa concentrata ed è caricata da una forza dipendente dal tempo. It is simply supported. The problem is described using the following parameters. Determine the deflections in the given test times.
Una piastra ortotropa quadrata stratificata è completamente fissata nel suo punto centrale e sottoposta a pressione. Confronta le inflessioni degli angoli della piastra per verificare la correttezza della trasformazione.
Si consideri un tubo rigido del ponteggio, fissato nella parte inferiore utilizzando il vincolo esterno del ponteggio e caricato sia da un momento che da una forza. Self-weight is not considered. Considering an infinitely rigid beam, determine the maximum radial deflection.
Un sistema monomassa con gioco e due molle è inizialmente flesso. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Considera una trave ASTM A992 W 18x50 per campata e carichi permanenti e permanenti uniformi come mostrato nella Figura 1. L'asta è limitata ad una profondità nominale massima di 18 pollici. L'inflessione del carico variabile è limitata a L/360. La trave è semplicemente vincolata e controventata in modo continuo. Verifica la resistenza a flessione disponibile della trave selezionata, sulla base di LRFD e ASD.
Una trave in acciaio con una sezione trasversale quadrata è caricata con una forza assiale e un carico distribuito. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Un recipiente a due strati, aperto, a parete spessa, è caricato dalla pressione interna ed esterna; quindi, non c'è tensione assiale. While neglecting self‑weight, the radial deflection of the inner and outer radius, and the pressure (radial stress) in the middle radius is determined.
Uno sbalzo di sezione trasversale rettangolare ha una massa alla fine. Furthermore, it is loaded by an axial force. Calculate the natural frequency of the structure. Neglect the self‑weight of the cantilever and consider the influence of the axial force for the stiffness modification.
Un recipiente con pareti spesse è caricato da una pressione interna tale che il recipiente raggiunge uno stato elastico-plastico. While neglecting self‑weight, the analytical and numerical solutions for the radial position of the plastic zone border (under the Tresca hypothesis) are determined and compared.
Un sistema monomassa con dashpot è soggetto a una forza di carico costante. Determine the spring force, damping force, and inertial force at the given test time. In this verification example, the Kelvin--Voigt dashpot (namely, a spring and a damper element in serial connection) is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.
Una mensola costituita da una barra tonda è caricata da un carico eccentrico uniforme. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Uno sbalzo è completamente fissato all'estremità sinistra e caricato da una forza trasversale e da una forza assiale sull'estremità destra. The tensile strength is zero and the behavior in the compression remains elastic.
Dimostra che l'accoppiamento di diversi elementi dimensionali non influisce sui risultati. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.
Una fune di acciaio o una membrana con perni su entrambe le estremità è caricata da un carico distribuito. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.