Determina analiticamente la costante di torsione per la sezione trasversale del tubo (area anulare) e confronta i risultati con la soluzione numerica in RFEM 5 e RSTAB 8 per vari spessori di parete.
Uno sbalzo da una sezione trasversale rettangolare giace su una fondazione elastica Winkler e caricato da un carico distribuito. The image shows the calculation of the maximum deflection and maximum bending moment.
Una trave in acciaio con una sezione trasversale quadrata è caricata con una forza assiale e un carico distribuito. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Una trave in acciaio caricata assialmente con una sezione trasversale quadrata è bloccata a un'estremità e supportata da una molla all'altra. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.
Una piastra ortotropa quadrata stratificata è completamente fissata nel suo punto centrale e sottoposta a pressione. Compare the deflections of the plate corners to check the correctness of the transformation.
Uno sbalzo con fibre che non corrono in direzione dell'asse della trave da una sezione trasversale quadrata con pressione di trazione. Calculate the maximum deflection.
Un blocco tridimensionale in materiale elastico-plastico è fissato ad entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Determina l'inflessione massima di un blocco tridimensionale fissato ad entrambe le estremità. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.
Determina l'inflessione massima di quattro colonne fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.