Una trave reticolare piana composta da quattro aste inclinate e un'asta verticale è caricata nel nodo superiore per mezzo di una forza verticale e una forza fuori dal piano. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Una mensola costituita da una barra tonda è caricata da una forza assiale eccentrica. Determine the maximum vertical deflection of the console using the geometrically linear and second-order analysis.
Una mensola costituita da una barra tonda è caricata da una forza trasversale eccentrica. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Una mensola costituita da una barra tonda è caricata da un carico eccentrico uniforme. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Una membrana è tesa mediante precompressione isotropa tra due raggi di due cilindri concentrici che non giacciono in un piano parallelo all'asse verticale. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Una membrana cilindrica viene tesa mediante precompressione isotropa. Find the final minimal shape of the membrane - catenoid. Determine the maximum radial deflection of the membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Una struttura poco profonda simmetrica è composta da otto aste reticolari uguali, che sono incorporate nei supporti delle cerniere. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Una fune è caricata per mezzo di un carico uniforme. This causes the deformed shape in the form of the circular segment. Determine the equilibrium force of the cable to obtain the given sag of the cable. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Una membrana a palloncino sferico è riempita di gas con pressione atmosferica e volume definito (questi valori sono utilizzati solo per la definizione del modello EF). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Un tubo con una sezione trasversale tubolare è caricato dalla pressione interna. This internal pressure causes axial deformation of the pipe (the Bourdon effect). Determine the axial deformation of the pipe endpoint.