L'esempio di verifica descrive i carichi di pressione sulle pareti di edifici in disposizione in tandem situati a livello del suolo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Una membrana a palloncino sferico è riempita di gas con pressione atmosferica e volume definito (questi valori sono utilizzati solo per la definizione del modello EF). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Un tubo con una sezione trasversale tubolare è caricato dalla pressione interna. This internal pressure causes axial deformation of the pipe (the Bourdon effect). Determine the axial deformation of the pipe endpoint.
Una colonna è composta da una sezione in calcestruzzo (rettangolo 100/200) e una sezione in acciaio (profilo I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Questo esempio è una modifica dell'esempio di verifica 0061; l'unica differenza è che il materiale della nave è incomprimibile. An open‑ended, thick‑walled vessel is loaded by both inner and outer pressure. While neglecting self‑weight, the radial deflection of the inner and the outer radius is determined.
Un recipiente a due strati, aperto, a parete spessa, è caricato dalla pressione interna ed esterna; quindi, non c'è tensione assiale. While neglecting self‑weight, the radial deflection of the inner and outer radius, and the pressure (radial stress) in the middle radius is determined.
Quattro colonne sono fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Determina l'inflessione massima dello sbalzo costituito da due strati di vetro e uno strato di lamina nel mezzo. The plate is fully fixed at one end and subjected to uniform pressure.
Un blocco tridimensionale in materiale elastico-plastico è fissato ad entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Determina l'inflessione massima di un blocco tridimensionale fissato ad entrambe le estremità. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.
Determina l'inflessione massima di quattro colonne fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Un blocco tridimensionale in materiale elastico-plastico con indurimento è fissato su entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Determina le inflessioni massime del blocco considerando o trascurando l'effetto di taglio. The square block of the isotropic material is fully fixed at one end and loaded with uniform vertical pressure.