L'esempio di verifica descrive i carichi del vento in diverse direzioni del vento su un modello di un gruppo di edifici. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
L'esempio di verifica descrive i carichi di pressione sulle pareti di edifici in disposizione in tandem situati a livello del suolo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un grattacielo in blocchi urbani (modello in scala). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un edificio isolato (modello in scala).L'esempio è fornito dall'Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
Questo esempio di verifica confronta i calcoli del carico del vento su un edificio con copertura a due falde utilizzando la norma ASCE 7-16 e utilizzando la simulazione CFD in RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Questo esempio di verifica confronta i calcoli del carico del vento su un edificio con copertura piana utilizzando la norma ASCE 7-16 e utilizzando la simulazione CFD in RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
A sphere is subjected to a uniform flow of viscous fluid. The velocity of the fluid is considered at infinity. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
L'esempio di verifica confronta il calcolo del carico del vento su un edificio con una copertura a due falde utilizzando la norma EN 1991-1-4 e utilizzando la simulazione CFD in RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
L'esempio di verifica confronta il calcolo del carico del vento su un edificio con una copertura piana utilizzando la norma EN 1991-1-4 e utilizzando la simulazione CFD in RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Un sistema monomassa con gioco e due molle è inizialmente flesso. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Questo esempio di verifica si basa sull'esempio di verifica 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Un sistema monomassa con dashpot è soggetto a una forza di carico costante. Determine the deflection and velocity of the dashpot endpoint in the given test time.
Una struttura intelaiata a due piani a campata singola è soggetta a carichi sismici. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
Si consideri un tubo rigido del ponteggio, fissato nella parte inferiore utilizzando il vincolo esterno del ponteggio e caricato sia da un momento che da una forza. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Quattro colonne sono fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Un blocco tridimensionale in materiale elastico-plastico è fissato ad entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Determina l'inflessione massima di un blocco tridimensionale fissato ad entrambe le estremità. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.
Determina l'inflessione massima di quattro colonne fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Un blocco tridimensionale in materiale elastico-plastico con indurimento è fissato su entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.