Una struttura poco profonda simmetrica è composta da otto aste reticolari uguali, che sono incorporate nei supporti delle cerniere. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Una struttura è composta da quattro aste reticolari, che sono incastonate nei vincoli esterni delle cerniere. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Una colonna è composta da una sezione in calcestruzzo (rettangolo 100/200) e una sezione in acciaio (profilo I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Un sottile anello circolare di sezione trasversale rettangolare è esposto a pressione esterna. Determine the critical load and corresponding load factor for in-plane buckling.
Una trave in acciaio con una sezione trasversale quadrata è caricata con una forza assiale e un carico distribuito. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Una trave in acciaio caricata assialmente con una sezione trasversale quadrata è bloccata a un'estremità e supportata da una molla all'altra. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.