Uno sbalzo in acciaio con una sezione trasversale rettangolare è completamente fissato su un lato e libero sull'altro. The aim of this verification example is to determine the natural frequencies of the structure.
Un oscillatore a doppia massa è costituito da due molle lineari e masse, che sono concentrate nei nodi. The self-weight of the springs is neglected. Determine the natural frequencies of the system.
Una piastra di acciaio rettangolare di dimensioni è semplicemente supportata ai suoi bordi. Determine the natural frequencies of the rectangular plate.
Un sistema a doppia massa è costituito da due alberi e due masse rappresentate dai corrispondenti momenti di inerzia, concentrate in una data distanza come masse nodali. The left shaft is fixed, and the right mass is free. Neglecting the self‑weight of the shafts, determine the torsional natural frequencies of the system.
Una struttura reticolare planare è semplicemente vincolata. The aim of this verification example is to determine the natural frequencies of the structure.
Uno sbalzo con profilo a I è supportato sull'estremità sinistra e caricato dalla coppia. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).
Analisi time history di una trave a sbalzo (sistema SDOF) eccitata da una funzione periodica. Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.
Un'asta con le condizioni al contorno date è caricata dal momento torcente e dalla forza assiale. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Provide a comparison of those values while assuming or neglecting the influence of the normal force. The verification example is based on the example introduced by Gensichen and Lumpe.
L'esempio di verifica descrive i carichi di pressione sulle pareti di edifici in disposizione in tandem situati a livello del suolo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Determina le prime sedici frequenze naturali di una doppia croce con una sezione trasversale quadrata. Ciascuno degli otto bracci è modellato per mezzo di quattro elementi a trave e ha un vincolo esterno all'estremità (le inflessioni x e y sono limitate). Le vibrazioni sono considerate solo nel piano xy. Il problema è definito secondo gli standard NAFEMS Benchmarks.
Una struttura intelaiata a due piani a campata singola è soggetta a carichi sismici. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un edificio isolato (modello in scala).L'esempio è fornito dall'Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un grattacielo in blocchi urbani (modello in scala). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
Uno sbalzo di sezione trasversale rettangolare ha una massa alla fine. Furthermore, it is loaded by an axial force. Calculate the natural frequency of the structure. Neglect the self‑weight of the cantilever and consider the influence of the axial force for the stiffness modification.
Un sistema monomassa con gioco e due molle è inizialmente flesso. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
L'esempio di verifica descrive i carichi del vento in diverse direzioni del vento su un modello di un gruppo di edifici. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.