Il modello di materiale Kelvin-Voigt è costituito dalla molla lineare e dallo smorzatore viscoso collegati in parallelo. In questo esempio di verifica viene testato il comportamento temporale di questo modello durante il carico e il rilassamento in un intervallo di tempo di 24 ore. La forza costante Fx viene applicata per 12 ore e le restanti 12 ore è il modello del materiale senza carico (rilassamento). Viene valutata la deformazione dopo 12 e 20 ore. Viene utilizzata l'analisi time history con il metodo di Newmark lineare implicito.
Le norme disponibili, come EN 1991-1-4 [1], ASCE/SEI 7-16 e NBC 2015 hanno presentato parametri di carico del vento come il coefficiente di pressione del vento (Cp ) per forme di base. Il punto importante è come calcolare i parametri del carico del vento in modo più rapido e accurato piuttosto che lavorare su formule che richiedono tempo e talvolta complicate nelle norme.
Un telaio curvo chiamato telaio di Lee's è bloccato nei punti finali e caricato da una forza concentrata nel punto A. Determinare il rapporto di inflessione nel punto A nelle fasi di carico date. Il problema è definito secondo i parametri di riferimento non lineari NAFEMS.
L'esempio di verifica descrive i carichi del vento in diverse direzioni del vento su un modello di un gruppo di edifici. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
L'esempio di verifica descrive i carichi di pressione sulle pareti di edifici in disposizione in tandem situati a livello del suolo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un grattacielo in blocchi urbani (modello in scala). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un edificio isolato (modello in scala).L'esempio è fornito dall'Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
A sphere is subjected to a uniform flow of viscous fluid. The velocity of the fluid is considered at infinity. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
Una membrana è tesa mediante precompressione isotropa tra due raggi di due cilindri concentrici che non giacciono in un piano parallelo all'asse verticale. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Un recipiente con pareti spesse è caricato da una pressione interna tale che il recipiente raggiunge uno stato elastico-plastico. While neglecting self‑weight, the analytical and numerical solutions for the radial position of the plastic zone border (under the Tresca hypothesis) are determined and compared.
Una parete in muratura è esposta a un carico distribuito al centro della sua sezione superiore. The Isotropic Masonry 2D material model is compared with the Isotropic Linear Elastic model, with surface stiffness property Without Tension in the nonlinear calculation.
Uno sbalzo è caricato da una forza trasversale e assiale sull'estremità destra ed è completamente fissato sull'estremità sinistra. The problem is described by the following set of parameters. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
Una trave lunga e sottile trasporta una massa concentrata ed è caricata da una forza dipendente dal tempo. It is simply supported. The problem is described using the following parameters. Determine the deflections in the given test times.
Analisi time history di una trave a sbalzo (sistema SDOF) eccitata da una funzione periodica. Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. Il peso proprio è trascurato. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Determina l'inflessione massima di quattro colonne fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.