Una struttura è costituita da una trave con profilo a I e da due travi reticolari tubolari. La struttura contiene diverse imperfezioni ed è caricata dalla forza Fz. Il peso proprio è trascurato in questo esempio. Determina le inflessioni uy e uz e la rotazione assiale φx al punto finale (punto 4). L'esempio di verifica si basa sull'esempio introdotto da Gensichen e Lumpe.
Una struttura costituita da un profilo a I è incorporata nei supporti delle forche. The axial rotation is restricted on both ends while warping is enabled. The structure is loaded by two transverse forces in the middle. The verification example is based on the example introduced by Gensichen and Lumpe.
Uno sbalzo a parete sottile di un profilo QRO è completamente fissato all'estremità sinistra e l'ingobbamento è abilitato. The cantilever is subjected to torque. Small deformations are considered, and the self-weight is neglected. Determine the maximum rotation, primary moment, secondary moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
Un'asta con le condizioni al contorno date è caricata dal momento torcente e dalla forza assiale. Trascurando il suo peso proprio, determina la deformazione torsionale massima della trave' e il suo momento torcente interno, definito come la somma di un momento torcente primario e un momento torcente causato dalla forza normale. Fornire un confronto di questi valori assumendo o trascurando l'influenza della forza normale. L'esempio di verifica si basa sull'esempio introdotto da Gensichen e Lumpe.
La trave continua con quattro campate è caricata da forze assiali e di flessione (sostituzione delle imperfezioni). Tutti i vincoli esterni sono a forcella - l'ingobbamento è libero. Determina gli spostamenti uy e uz, i momenti My, Mz, Mω e MTpri e la rotazione φx. L'esempio di verifica si basa sull'esempio introdotto da Gensichen e Lumpe.
Un'asta con le condizioni al contorno date è caricata dal momento torcente e dalla forza assiale. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Provide a comparison of those values while assuming or neglecting the influence of the normal force. The verification example is based on the example introduced by Gensichen and Lumpe.
Una struttura composta da un profilo a I è completamente fissata all'estremità sinistra e incorporata nel supporto scorrevole all'estremità destra. The structure consists of two segments. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Una trave è completamente fissa (l'ingobbamento è limitato) all'estremità sinistra e supportata da un vincolo esterno a forcella (l'ingobbamento è abilitato) all'estremità destra. The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
La rotazione assiale del profilo a I è limitata su entrambe le estremità per mezzo dei supporti a forcella (l'ingobbamento non è limitato). La struttura è caricata da due forze trasversali al centro. Il peso proprio è trascurato in questo esempio. Determina le inflessioni massime della struttura uy,max e uz,max, la rotazione massima φx,max, i momenti flettenti massimi My,max e Mz,max e i momenti torcenti massimi MT,max, MTpri,max, MTsec,max e Mω,max. L'esempio di verifica si basa sull'esempio introdotto da Gensichen e Lumpe.
La trave bloccata ad entrambe le estremità è caricata tramite la forza trasversale al centro. Trascurando il suo peso proprio e la rigidezza a taglio, determinare l'inflessione massima, la forza normale e il momento a metà campata assumendo la teoria del secondo e del terzo ordine. L'esempio di verifica si basa sull'esempio introdotto da Gensichen e Lumpe (vedere il riferimento).