Należy określić moment zginający, działający na swobodnym końcu wspornika, który nada prętowi kształt kołowy. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
Wspornik jest w pełni utwierdzony na lewym końcu i obciążony siłą poprzeczną oraz siłą osiową na prawym końcu. The tensile strength is zero and the behavior in the compression remains elastic.
Wspornik jest w pełni zamocowany na lewym końcu i obciążony momentem zginającym na prawym końcu. Materiał ten ma różną wytrzymałość plastyczną przy rozciąganiu i ściskaniu.
Belka ćwierćokrągła o przekroju prostokątnym jest obciążona siłą unoszącą się z płaszczyzny. This force causes a bending moment, torsional moment, and transverse force. While neglecting self-weight, determine the total deflection of the curved beam.
Belka zakrzywiona składa się z dwóch belek o prostokątnym przekroju. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Płyta eliptyczna z zakotwioną krawędzią nośną jest poddana równomiernie rozłożonemu obciążeniu poprzecznemu. Assuming the small deformation theory and neglecting the self‑weight, the maximum out‑of‑plane deflection of the plate is determined.
Słup w kształcie litery W zgodny z normą ASTM A992 14x132 jest obciążony zadanymi osiowymi siłami ściskającymi. Słup jest przegubowy na górze i na dole w obu osiach. Należy określić, czy słup jest w stanie wytrzymać obciążenie pokazane na rysunku 1 na podstawie LRFD i ASD.
Za pomocą LRFD i ASD należy określić wymagane wytrzymałości i współczynniki długości efektywnej dla słupów z materiału ASTM A992 w ramie skręcania pokazanej na rysunku 1 dla maksymalnej kombinacji obciążeń grawitacyjnych.
Za pomocą LRFD i ASD należy określić wymagane wytrzymałości i współczynniki długości efektywnej dla słupów z materiału ASTM A992 w ramie skręcania pokazanej na rysunku 1 dla maksymalnej kombinacji obciążeń grawitacyjnych.
Rozważ belkę ASTM A992 W 18×50 dla stałych i równomiernych obciążeń stałych i ruchomych, jak pokazano na Rysunku 1. The member is limited to a maximum nominal depth of 18 inches. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
Rozważ belkę ASTM A992 W 18x50 dla stałych i równomiernych obciążeń stałych i ruchomych, jak pokazano na Rysunku 1. Pręt jest ograniczony do maksymalnej nominalnej głębokości wynoszącej 18 cali. Ugięcie pod obciążeniem użytkowym jest ograniczone do L/360. Belka jest swobodnie podparta i usztywniona. Sprawdź dostępną wytrzymałość na zginanie wybranej belki na podstawie LRFD i ASD.
Przykład ten służy do zademonstrowania ograniczenia membrany. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Wspornik jest obciążony siłą poprzeczną i osiową na prawym końcu i jest w pełni zamocowany na lewym końcu. The problem is described by the following set of parameters. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
Na swobodnie podpartą płytę o przekroju trójkątnym równobocznym działa równomiernie rozłożone obciążenie poprzeczne. Assuming the small deformation theory and neglecting self‑weight, the maximum out‑of‑plane deflection of the plate is determined.
Cienki okrągły pierścień o prostokątnym przekroju poddany jest działaniu ciśnienia zewnętrznego. Determine the critical load and corresponding load factor for in-plane buckling.
Krzyżulec o przekroju okrągłym jest podparty zgodnie z czterema podstawowymi przypadkami wyboczenia Eulera i poddany działaniu siły ściskającej. Determine the critical load.
Słup składa się z przekroju betonowego (prostokąt 100/200) oraz stalowego (profil I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Wspornik jest obciążony momentem na jego wolnym końcu. Using the geometrically linear analysis and large deformation analysis, and neglecting the beam's self-weight, determine the maximum deflections at the free end. The verification example is based on the example introduced by Gensichen and Lumpe.
Wspornik wielowarstwowy składa się z trzech warstw (rdzenia i dwóch powierzchni). Jest ono zamocowane na lewym końcu, a na prawym obciążone siłą skupioną.
Wspornik o profilu dwuteowym jest podparty na lewym końcu i obciążony momentem obrotowym. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).
Wspornik przekroju Z jest w pełni utwierdzony na końcu i obciążony momentem obrotowym, który w przypadku modelu powłokowego jest reprezentowany przez kilka sił tnących. Wyznacz naprężenie osiowe w punkcie A (powierzchnia środkowa). Problem jest zdefiniowany zgodnie z normą NAFEMS Benchmarks.
Pręt o zadanych warunkach brzegowych jest obciążony momentem skręcającym i siłą osiową. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Provide a comparison of those values while assuming or neglecting the influence of the normal force. The verification example is based on the example introduced by Gensichen and Lumpe.
Najpierw zostaje ugięty układ jednomasowy z luzem i dwiema sprężynami. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Przykład obliczeniowy opisuje stacjonarny przepływ wokół wieżowca w postaci bloków miejskich (model w skali). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
Prosty oscylator składa się z masy m (rozpatrywanej tylko w kierunku x) i liniowej sprężystości sztywności k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.