Model to Download
Model created by the technical team of Dlubal Latam. Model can be also available as parametrized block at Dlubal Latam site.
In this article, the adequacy of a 2x4 dimension lumber subject to combined bi-axial bending and axial compression is verified using RF-/TIMBER AWC add-on module. The beam-column properties and loading are based on example E1.8 of AWC Structural Wood Design Examples 2015/2018.
RF-/TIMBER SANS Add-on Module for RFEM/RSTAB | Design of Timber Members According to SANS 10163 (South African Code)
RF-/TIMBER CSA Add-on Module for RFEM/RSTAB | Design of Timber Members According to CSA 086 (Canadian Code)
RF-/TIMBER AWC Add-on Module for RFEM/RSTAB | Design of Timber Members According to ANSI/AWC NDS-2015 (US Code)
RF-/JOINTS Timber - Timber to Timber Add-on Module for RFEM/RSTAB | Design of Direct Timber Connections According to Eurocode 5
Compared to the RF-/TIMBER Pro add-on module (RFEM 5/RSTAB 8), the following new features have been added to the Timber Design add-on for RFEM 6/RSTAB 9:
- In addition to Eurocode 5, other international standards are integrated (SIA 265, ANSI/AWC NDS, CSA 086, GB 50005)
- Design of compression perpendicular to grain (support pressure)
- Implementation of eigenvalue solver for determining the critical moment for lateral-torsional buckling (only EC 5)
- Definition of different effective lengths for design at normal temperature and fire resistance design
- Evaluation of stresses via unit stresses (FEA)
- Optimized stability analyses for tapered members
- Unification of the materials for all national annexes (only one "EN" standard is now available in the material library for a better overview)
- Display of cross-section weakenings directly in the rendering
- Output of the used design check formulas (including a reference to the used equation from the standard)
- How do I perform stability analysis to determine the critical load factor in RFEM 6?
- Where can I find the materials for the corresponding National Annexes in RFEM 6 and RSTAB 9?
- How does the "Orthotropic Plastic" material model work in RFEM?
- What is the meaning of the superposition according to the CQC rule in a dynamic analysis??
- Can I use RFEM to calculate a log house three-dimensionally?
- How do I display some results of all load cases in the printout report, but other results of the selected load cases only?
- I would like to carry out the flexural buckling design for timber components with imperfections and internal forces according to the second-order analysis. Is it sufficient to activate this in Details of the RF‑/TIMBER Pro add-on module or is it necessary to make additional settings?
- Can I design laminated veneer lumber with RFEM/RSTAB?
- How can I calculate a timber-concrete composite floor with cross-laminated timber?
- Is it possible to save the structures of the manufacturer-specific cross-laminated timber plates in the RF‑LAMINATE add-on module?