Timber Structure with Design Supports
Model to Download
Download the model of a timber structure with design supports here and open it with the structural FEA software RFEM.
This model is used in the free webinar "Modeling and Design of Timber Structures in RFEM 6 and RSTAB 9" on November 11, 2021 (English, November 9, 2021, in German).
Model Used in
In this article, the adequacy of a 2x4 dimension lumber subject to combined bi-axial bending and axial compression is verified using RF-/TIMBER AWC add-on module. The beam-column properties and loading are based on example E1.8 of AWC Structural Wood Design Examples 2015/2018.
RF-/TIMBER SANS Add-on Module for RFEM/RSTAB | Design of Timber Members According to SANS 10163 (South African Code)
RF-/TIMBER CSA Add-on Module for RFEM/RSTAB | Design of Timber Members According to CSA 086 (Canadian Code)
RF-/TIMBER AWC Add-on Module for RFEM/RSTAB | Design of Timber Members According to ANSI/AWC NDS-2015 (US Code)
RF-/JOINTS Timber - Timber to Timber Add-on Module for RFEM/RSTAB | Design of Direct Timber Connections According to Eurocode 5
Compared to the RF-/TIMBER Pro add-on module (RFEM 5/RSTAB 8), the following new features have been added to the Timber Design add-on for RFEM 6/RSTAB 9:
- In addition to Eurocode 5, other international standards are integrated (SIA 265, ANSI/AWC NDS, CSA 086, GB 50005)
- Design of compression perpendicular to grain (support pressure)
- Implementation of eigenvalue solver for determining the critical moment for lateral-torsional buckling (only EC 5)
- Definition of different effective lengths for design at normal temperature and fire resistance design
- Evaluation of stresses via unit stresses (FEA)
- Optimized stability analyses for tapered members
- Unification of the materials for all national annexes (only one "EN" standard is now available in the material library for a better overview)
- Display of cross-section weakenings directly in the rendering
- Output of the used design check formulas (including a reference to the used equation from the standard)
- How do I perform stability analysis to determine the critical load factor in RFEM 6?
- Where can I find the materials for the corresponding National Annexes in RFEM 6 and RSTAB 9?
- How does the "Orthotropic Plastic" material model work in RFEM?
- What is the meaning of the superposition according to the CQC rule in a dynamic analysis??
- Can I use RFEM to calculate a log house three-dimensionally?
- How do I display some results of all load cases in the printout report, but other results of the selected load cases only?
- I would like to carry out the flexural buckling design for timber components with imperfections and internal forces according to the second-order analysis. Is it sufficient to activate this in Details of the RF‑/TIMBER Pro add-on module or is it necessary to make additional settings?
- Can I design laminated veneer lumber with RFEM/RSTAB?
- How can I calculate a timber-concrete composite floor with cross-laminated timber?
- Is it possible to save the structures of the manufacturer-specific cross-laminated timber plates in the RF‑LAMINATE add-on module?