You cannot download this structural model (for example, because it is a customer's model).
Truss Girder Made of Rectangular Hollow Sections with Steel Connections
Model
Description
Truss made of rectangular hollow sections with bolted and welded steel connections
Model Used in
Keywords
Truss girder Rectangular hollow section Bolted Welded Steel Joint Connection
Write Comment...
Write Comment...
- Views 872x
- Downloads 97x
- Updated 11/24/2022
- Number of Nodes 13
- Number of Lines 21
- Number of Members 21
- Number of Surfaces 0
- Number of Solids 0
- Number of Load Cases 1
- Number of Load Combinations 1
- Number of Result Combinations 0
- Total Weight 1.770 tons
- Dimensions 107.61 x 43.04 x 0 feet
No Download Possible
Evaluating and Documenting Steel Joints Analysis Results in RFEM 6
With the RFEM 6 add-on Steel Joints, you can analyze steel connections by using an FE model. This article demonstrates how to evaluate and document the steel joints analysis results.
- The load distribution on my members looks different when using the Load Transfer surface vs. the Load Wizards. What is the reason?
- I received an error message “Surface of incompatible type... (Surface in upper plane of building story must be of ‘Load transfer’ type)” when running the calculation. What is the reason?
- My beam has a continuous lateral support and therefore lateral torsional buckling (LTB) is not a concern. How do I define the effective length?
