Console
Model to Download
Description
Download the model of a console here and open it with the structural FEA software RFEM.
This model is used in the free webinar "Stress Analysis of Surfaces and Members in RFEM 6 and RSTAB 9" on July 14, 2020 (English, July 12, 2020, in German).
Model Used in
Keywords
Write Comment...
Write Comment...
Disclaimer
This structural analysis model available for download may be used for learning or testing purposes. There is no guarantee or liability for the accuracy or completeness of the model.
![[DE] CP 001193 | Hobro Arrest Prison Scaffolding, Denmark](/-/media/Images/netgenium/thumbnails/2/9/6/6/6/2966608/2966608.png?la=en-US&mw=348&mlid=009873CC759B413CAB8A477C624F3044&hash=2F048EAABE9F49074C3ADC9738AAC79E2BABFFE6)
Designing Aluminum Structures in RFEM 6 According to Eurocode 9
RFEM 6 offers the Aluminum Design add-on to design aluminum members for the ultimate and serviceability limit states according to Eurocode 9. In addition to this, you can perform design according to ADM 2020 (US Standard).
New
Aluminum Design | Design Checks for General RSECTION Cross-Sections
New
Aluminum Design | Tension Design Considering Reduced Cross-Sectional Area (such as Hole Weakening)
New
Aluminum Design | Consideration of Internal Forces from Calculation with Torsional Warping (7 Degrees of Freedom)
New
Aluminum Design | Graphical Display of Mode Shape for Lateral-Torsional Buckling Analysis
-
The limit stress is activated, but my stress ratio is “non-designable” in the Stress-Strain Analysis add-on. What could be the reason?
- How do I define a member as a cantilever and not as supported at both ends for serviceability or deflection design?
- How do I create a user-defined Design Situation with my own chosen load combinations?
- How can I carry out case-related design for different load situations?
- How do I apply wind load on members of open structures?
- I encountered a sharing violation while importing a dxf file into SHAPE‑THIN. What is the issue?
- How is the automatic creation of c/t-parts carried out?
- I want to create a mapped mesh for a circular hole plate. Is it possible to generate such a mesh in RFEM?
- Is it possible to consider the reduction of strength in the heat affected zone (HAZ) in the RF‑/ALUMINUM add-on module?
- How do I define a member as a cantilever and not as supported at both ends for serviceability or deflection design?
Social Networks
Frequently Visited Pages