Beam with Stiffener Connected to Column
Model to Download
Description
Download the model of a Beam with Stiffener Connected to Column here and open it with the finite element program RFEM.
Keywords
Steel Steel Structure Connection Steel Joint Beam Stiffener
Links
Write Comment...
Write Comment...
Disclaimer

Evaluating and Documenting Steel Joints Analysis Results in RFEM 6
With the RFEM 6 add-on Steel Joints, you can analyze steel connections by using an FE model. This article demonstrates how to evaluate and document the steel joints analysis results.
-
The load distribution on my members looks different when using the Load Transfer surface vs. the Load Wizards. What is the reason?
- My beam has a continuous lateral support and therefore lateral torsional buckling (LTB) is not a concern. How do I define the effective length?
- I received an error message “Surface of incompatible type... (Surface in upper plane of building story must be of ‘Load transfer’ type)” when running the calculation. What is the reason?
- How can I efficiently define line hinges on several surfaces?
- How do I include the overstrength factor(s) Ωo in the ASCE 7 load combinations?
- How do I include the redundancy factor(s) ρ in the ASCE 7 load combinations?
- My live load is less than or equal to 100 psf. How do I consider the reduced load factor in the ASCE 7 load combinations?
- I do not see the seismic load cases in my generated ASCE 7 load combinations (COs). How do I add them?
- How do I create an imperfection based on a mode shape in RFEM 6?
- My beam has a continuous lateral support and therefore lateral torsional buckling (LTB) is not a concern. How do I define the effective length?