RF-/TOWER Design | Design

Technical Article on the Topic Structural Analysis Using Dlubal Software

  • Knowledge Base

Product Feature

For designs of tension stress, compression, bending stress, and shear force resistance, the maximum resistance design values are compared with the action design values. If structural components are subjected to both bending and compression at the same time, the RF-/TOWER Design add-on module performs an interaction. You can determine the factors according to Method 1 (Annex A) or Method 2 (Annex B).

For the flexural buckling design, it is not necessary to enter the slenderness ratio or the elastic critical buckling load of the governing buckling case. The module automatically performs calculation of all required factors for the bending stress design value. RF-/TOWER Design determines the effective critical moment for lateral-torsional buckling for each member on every x-location of the cross-section.

Write Comment...

Write Comment...

Stability and Torsional Warping Analysis in RFEM 6

Stability Analysis and Torsional Warping (7 DOF) in RFEM 6

Webinar 17 March 2022 2:00 PM - 3:00 PM CET

Analysis of Steel Joints Using FE Model in RFEM 6

Analysis of Steel Joints Using FE Model in RFEM 6

Webinar 24 February 2022 2:00 PM - 3:00 PM CET

Modeling and Design of Steel Structures in RFEM 6 and RSTAB 9

Modeling and Design of Steel Structures in RFEM 6 and RSTAB 9

Webinar 20 October 2021 2:00 PM - 3:00 PM CEST

Plate and Shell Buckling Utilizing Dlubal Software

Plate and Shell Buckling Utilizing Dlubal Software

Webinar 30 March 2021 2:00 PM - 2:45 PM CEST

Stability Design in Steel Construction with RFEM and RSTAB

Stability Design in Steel Construction with RFEM and RSTAB

Webinar 1 December 2020 2:00 PM - 2:45 PM CET

Documenting Results in the RFEM Printout Report

Documenting Results in the RFEM Printout Report

Webinar 25 August 2020 2:00 PM - 2:45 PM CEST

Programmable COM Interface for RFEM/RSTAB

Programmable COM Interface for RFEM/RSTAB

Webinar 12 May 2020 3:00 PM - 3:45 PM CEST

Designing Cold-Formed Steel Sections According to Eurocode 3

Designing Cold-Formed Steel Sections According to Eurocode 3

Webinar 30 April 2020 3:00 PM - 3:45 PM CEST

Membrane Structures with Wind Loads From CFD Wind Simulation

Membrane Structures with Wind Loads From CFD Wind Simulation

Webinar 24 March 2020 3:00 PM - 4:15 PM CET

CRANEWAY

Design of Craneway Girders According to Eurocode 3

Webinar 20 June 2017 3:00 PM - 4:00 PM CEST

Modelling and Design of Steel Lattice Towers in RFEM and RSTAB

Modeling and Designing Steel Towers by Using RFEM

Webinar 23 February 2015 3:00 PM - 4:00 PM

Building Information Modelling (BIM)

BIM Workflow Using RFEM and Revit Structure

Webinar 4 December 2013 3:00 PM - 4:00 PM

RFEM 5 - BIM Integration with Tekla Structures

RFEM 5 | BIM Integration with Tekla Structures

Webinar 19 September 2013 3:00 PM - 4:00 PM

RFEM 5
RF-TOWER Design

Add-on Module

Design of triangular and quadrilateral lattice towers according to European standards

Price of First License
1,480.00 USD