348x

2022-03-30

Timber Design | Serviceability Limit State | Results

You find the serviceability limit state design fully integrated in the result tables of the Timber Design add-on. If yuo want to check the design results, you can open the program and display the results with all the details at each location of the designed members. Furthermore, graphics are available for you with the result diagrams of the design ratios.

A special thing is that All result tables and graphics can be integrated into the global printout report of RFEM/RSTAB as a part of the timber design results. You can also display and document the deformations of the entire structure as a part of the RFEM/RSTAB functionality. This function is independent of the add-on.

Assigning Design Situation Type for Timber Design in Case of Fire According to EN 1995

Do you have any questions?

Events

2024-04-30

Online Training

RFEM 6 | Students | Introduction to Timber Design

2024-05-02

Construction Stages in Membrane Structures with RFEM 6

Webinar

Construction Stages in Membrane Structures with RFEM 6

2024-05-08

Online Training

RFEM 6 | Students | Introduction to Reinforced Concrete Design

2024-05-08

$Cross-Section Modeling and \n Stress Analysis in RSECTION 1$

Webinar

Cross-Section Modeling and Stress Analysis in RSECTION 1

2024-05-15

Online Training

RFEM 6 | Students | Introduction to Steel Design

2024-05-16

Consideration of Construction Stages in RFEM 6

Webinar

Consideration of Construction Stages in RFEM 6

2024-05-23

Most Frequently Asked Questions Answered by Dlubal Support Team

Webinar

Most Frequently Asked Questions Answered by Dlubal Support Team | May 2024

2024-05-29

$Steel Structures in RFEM 6 \n Part 1: Modeling, Load Input$

Webinar

Modeling and Design of Steel Structures in RFEM 6 | Part 1: Modeling, Load Input

2024-06-06

$Steel Structures in RFEM 6 \n Part 2: Combinations, Design, Documentation$

Webinar

Modeling and Design of Steel Structures in RFEM 6 | Part 2: Combinations, Design, Documentation

2024-06-20

Webinar

Most Frequently Asked Questions Answered by Dlubal Support Team | June 2024

2024-10-16

Online Training

RFEM 6 | Students | Introduction to Member Design

2024-10-23

Online Training

RSECTION 1 | Students | Introduction to Strength of Materials

Videos

FAQ 005494 | How can I model a timber beam with stiffening on both sides? (splice)

FAQ

FAQ 005494 | How can I model a timber beam with stiffening on both sides? (splice)

Length: 00:01:22 min

Product Feature

Fire Resistance Design of Surfaces for EN 1995, SIA 265, NDS, and CSA O86

Length: 00:00:56 min

Event

Webinar | Timber Floor Calculations in RFEM 6

Length: 00:55:27 min

Event

RFEM 6 for Students | Introduction to Timber Design | November 29, 2023

Length: 01:10:03 min

Product Feature

Cross‑Section Optimization

Length: 00:00:56 min

FAQ

FAQ 005410 | How is the equivalent dimension calculated for round section in the Timber Design ad...

Length: 00:00:28 min

Event

Webinar | Introduction to RFEM 6 and RSTAB 9 | Part 2: Combinatorics, Design, Documentation

Length: 01:01:40 min

Event

Webinar | Member and Surface Design of Timber Components in RFEM 6

Length: 01:10:01 min

Knowledge Base

KB 001819 | Deflection Analysis of Member Elements

Length: 00:04:18 min

Playlist

Models to Download

381x

82x

Timber Frame Building

Model 004809 | Cross-Laminated Timber Building

361x

54x

Cross-Laminated Timber Building

202x

24x

Timber Slab

Model 004717 | Ceiling with Line Releases

248x

26x

Ceiling with Line Releases

Model 004707 | Office Building of Municipal Works in Kirchheim unter Teck, Germany

269x

Office Building Timber Structure with Reinforced Concrete Elements

473x

Timber Industrial Hall Siegrist Igor Carpenteria

455x

50x

Trussed Roof

471x

58x

Timber-Concrete Building

647x

53x

Timber Column Base

Knowledge Base Articles

KB 001848 | Timber Column Design as per the 2018 NDS Standard in RFEM 6

Using the Timber Design add-on, timber column design is possible according to the 2018 NDS standard ASD method. Accurately calculating timber member compressive capacity and adjustment factors is important for safety considerations and design. The following article will verify the maximum critical buckling strength calculated by the Timber Design add-on using step-by-step analytical equations as per the NDS 2018 standard including the compressive adjustment factors, adjusted compressive design value, and final design ratio.

KB 001825 | WebService & API for Analysis of Construction Stages

When calculating regular structures, data input is often not complicated but time-consuming. Input automation can save valuable time. The task described in the present article is to consider the stories of a house as single construction stages. Data is entered using a C# program so that the user does not have to enter the elements of the individual floors manually.

Our webservice offers users the opportunity to communicate with RFEM 6 and RSTAB 9 using various programming languages. Dlubal's high-level functions (HLFs) allow you to expand and simplify the WebService's functionality. In line with RFEM 6 and RSTAB 9, using our WebService makes the engineer's work easier and faster. Check it out now! This tutorial shows you how to use the C# library by means of a simple example.

KB 001851 | Two-Hinged Frame with Individual Pin-Ended Column in Plane

The modal relevance factor is a result of the linear stability analysis and qualitatively describes the degree of participation of individual members in a specific mode shape.

Screenshots

Assigning Design Situation Type for Timber Design in Case of Fire According to EN 1995

Timber Structure of Lookout Tower

This image shows a user interface of the RFEM 6 software, which is used for the structural analysis and design. In the main area of the interface, there is a complex 3D model of a timber structure, presented in two different styles: before and after the deformation.

Global Deformation – Before and After Position of Timber Structure Due to Wind Forces in RFEM 6 | Knies Magician's Hat in Rapperswil, Switzerland © Ghisleni Partner AG

Global Deformation of Timber Structure Due to Wind Forces in RFEM 6 | Knies Magician's Hat in Rapperswil, Switzerland © Ghisleni Partner AG

RFEM Model of Palazzo Meridia Office and Retail Building in Nice, France | © Architecture-Studio

Tower Structure with Wind Load Generation in RFEM 6

Timber Structure with Wind Load Generation in RFEM 6 | © STATIC Solution s.r.o

Exterior View of Gym | © KL-Architectes

The construction of a gym in Metz | © KL-Architectes

Definition of Timber Panel Element

Product Features

A wide range of cross-sections, such as rectangular sections, square sections, T‑sections, circular sections, built-up cross-sections, irregular parametric cross-sections, and many others (suitability for design depends on the selected standard)
Design of cross-laminated timber (CLT)
Design of timber-based materials and laminated veneer lumber according to EC 5
Design of tapered and curved members (design method according to the standard)
Adjustment of the essential design factors and standard parameters is possible
Flexibility due to detailed setting options for basis and extent of calculations
Fast and clear results output for an immediate overview of the result distribution after the design
Detailed output of the design results and essential formulas (comprehensible and verifiable result path)
Numerical results clearly arranged in tables and graphical display of the results in the model
Integration of the output into the RFEM/RSTAB printout report

Timber Design - Design Details for Negligible Internal Forces

Design of tension, compression, bending, shear, torsion, and combined internal forces
Consideration of a notch
Design of compression perpendicular to the grain on the end and intermediate supports with (EC 5) and without reinforcement elements (fully threaded screws)
Optional shear force reduction at the support (see the Product Feature)
Design of curved and tapered members
Consideration of higher strengths for similar components that are close together (factor k_sys according to EN 1995‑1‑1, 6.6(1)-(3))
Option to increase shear resistance for softwood timber according to DIN EN 1995‑1‑1:NA NDP to 6.1.7(2)

Stability analyses for flexural buckling, torsional buckling, and flexural-torsional buckling under compression
- Import of the effective lengths from the calculation using the Structure Stability add-on
Graphical input and check of the defined nodal supports and effective lengths for stability analysis
Determination of the equivalent member lengths for tapered members
Consideration of Lateral-Torsional Bracing Position
Lateral-torsional buckling analysis of the structural components subjected to moment loading
- Depending on the standard, a choice between user-defined input of Mcr, analytical method from the standard, and use of internal eigenvalue solver
- Consideration of a shear panel and a rotational restraint when using the eigenvalue solver
- Graphical display of a mode shape if the eigenvalue solver was used
Stability analysis of structural components with the combined compression and bending stress, depending on the design standard
Comprehensible calculation of all necessary coefficients, such as the factors for considering moment distribution or interaction factors
Alternative consideration of all effects for the stability analysis when determining internal forces in RFEM/RSTAB (second-order analysis, imperfections, stiffness reduction, possibly in combination with the Torsional Warping (7 DOF) add-on)

Results of Fire Resistance Design | EN 1995

Arbitrary definition of the charring time
Option to calculate with or without adhesion of the layer for surface structures (cross-laminated timber)
Free user-defined specification of the fire parameters
Consideration of Different Effective Lengths in Fire Resistance Design
Optional design "Compression perpendicular to grain"
Graphical result display integrated in RFEM/RSTAB, such as a design ratio
Complete integration of the results into the RFEM/RSTAB printout report

Frequently Asked Questions (FAQ)

Which Dlubal software products do you recommend for the structural analysis and design of timber structures in particular?

How can I model a timber beam with stiffening on both sides? (splice)

How can I generate an area load on members via cells in RFEM 6 or RSTAB 9?

Which programs do I need for laminate and sandwich structures, or cross-laminated timber (CLT)?

Which Dlubal Software programs can I use to calculate and design timber structures?

How can I connect surfaces to other surfaces or members in a hinged/semi-rigid way?
What are Line Hinges and Line Releases?

Recommended Products for You

RFEM 6 | Main Program RFEM 6

RFEM 6

Main Program

The new generation of 3D FEA software is used for the structural analysis of members, surfaces, and solids.

Price of First License 4,170.00 USD

RFEM 6 | Design

Timber Design for RFEM 6

Add-On

The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.

Price of First License 1,930.00 USD

RFEM 6 | Additional Analysis

Structure Stability for RFEM 6

Add-On

The Structure Stability add-on performs stability analysis of structures. It determines critical load factors and the corresponding stability modes.

Price of First License 1,300.00 USD

RSTAB 9 | Main Program RSTAB 9

RSTAB 9

Structural Frame and Truss Analysis Software

Main Program

The modern 3D structural analysis and design program is suitable for the structural and dynamic analysis of beam structures as well as the design of concrete, steel, timber, and other materials.

Price of First License 2,910.00 USD

RSTAB 9 | Design

Timber Design for RSTAB 9

Add-On

The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.

Price of First License 1,930.00 USD

RX-TIMBER 2 | Timber Structures

RX-TIMBER Glued-Laminated Beam 2