Symetryczna płytka konstrukcja składa się z ośmiu równych prętów kratownicowych, osadzonych w podporach przegubowych. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Sferyczna membrana balonu jest wypełniona gazem o ciśnieniu atmosferycznym i określonej objętości (wartości te są wykorzystywane tylko do definiowania modelu ES). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Konstrukcja składa się z czterech prętów kratownicowych, osadzonych w podporach przegubowych. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Rozważ belkę ASTM A992 W 18×50 dla stałych i równomiernych obciążeń stałych i ruchomych, jak pokazano na Rysunku 1. The member is limited to a maximum nominal depth of 18 inches. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
Belka zakrzywiona składa się z dwóch belek o prostokątnym przekroju. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Cienkościenne naczynie kuliste jest obciążone ciśnieniem wewnętrznym. While neglecting self‑weight, determine the von Mises stress and the radial deflection of the vessel.
Wspornik o przekroju okrągłym jest obciążony skupioną siłą zginającą i momentem obrotowym. The aim of this verification example is to compare the reduced stress according to the von Mises and Tresca theories.
Dwuwarstwowe, grubościenne naczynie o grubych ścianach jest obciążone ciśnieniem wewnętrznym i zewnętrznym; dlatego nie ma naprężenia osiowego. While neglecting self‑weight, the radial deflection of the inner and outer radius, and the pressure (radial stress) in the middle radius is determined.
Płyta kompaktowa (CD) obraca się z prędkością 10 000 obr./min. Therefore, it is subjected to centrifugal force. The problem is modeled as a quarter model. Determine the tangential stress on the inner and outer diameters and the radial deflection of the outer radius.
Rozważmy sztywną rurę rusztowania, zamocowaną u dołu za pomocą podpory węzłowej rusztowania i obciążoną zarówno momentem, jak i siłą. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Cztery słupy są zamocowane na dole, a od góry połączone sztywnym blokiem. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Szeroka płyta z otworem jest obciążona w jednym kierunku przez naprężenie rozciągające. The plate width is large with respect to the hole radius, and it is very thin, considering the state of the plane stress.