Membrane structures in RFEM | Arabic

The new generation of 3D FEA software is used for the structural analysis of members, surfaces, and solids.

The Form-Finding add-on finds the optimal shape of members subjected to axial forces and tension-loaded surface models. The shape is determined by the equilibrium between the member axial force or the membrane stress and the existing boundary conditions.

Structural engineering software for a finite element analysis (FEA) of planar and spatial structural systems consisting of plates, walls, shells, members (beams), solids, and contact elements

Form-finding of tensile membrane and cable structures

Generation of cutting patterns for tensile membrane structures

The modern 3D structural analysis and design program is suitable for the structural and dynamic analysis of beam structures as well as the design of concrete, steel, timber, and other materials.

The Steel Design add-on performs the ultimate and serviceability limit state design checks of steel members according to various standards.

The Steel Design add-on performs the ultimate and serviceability limit state design checks of steel members according to various standards.

Design of steel members according to Eurocode 3

Design of steel members according to the American standard ANSI/AISC 360

Design of steel members according to the Swiss standard SIA 263

Design of steel members according to the Indian standard IS 800:2007

Design of steel members according to the British standard BS 5950-1:2000 or British Annex BS EN 1993-1-1

Design of steel members according to the Chinese standard GB 50017-2003

Design of steel members according to the Canadian standard CSA S16

Design of steel members according to the Australian standard AS 4100-1998

Design of steel members according to the Mexican standard NTC-DF 2004

Design of steel members according to the Russian standard SP 16.13330.2011

Design of steel members according to the South African standard SANS 10162-1:2011

Design of steel members according to the Brazilian standard ABNT NBR 8800:2008

Design of steel members according to the Code of Practice for the Structural Use of Steel 2011 (Buildings Department – Hong Kong)

Stress analysis of steel members

Design of steel members according to Eurocode 3

Design of steel members according to the American standard ANSI/AISC 360

Design of steel members according to Swiss standard SIA 263

Design of steel members according to the Indian standard IS 800:2007

Design of steel members according to the British standard BS 5950-1:2000 or British Annex BS EN 1993-1-1

Design of steel members according to the Chinese standard GB 50017-2003

Design of steel members according to the Canadian standard CSA S16-09

Design of steel members according to the Australian standard AS 4100-1998

Design of steel members according to the South African standard SANS 10162-1:2011

Design of steel members according to the Russian standard SP 16.13330.2011

Design of steel members according to the Mexican standard NTC-DF 2004

Design of steel members according to Code of Practice for the Structural Use of Steel 2011 (Buildings Department – Hong Kong)

Design of steel members according to the Brazilian standard ABNT NBR 8800:2008

The Nonlinear Material Behavior add-on allows you to consider material nonlinearities in RFEM for example, isotropic plastic, orthotropic plastic, isotropic damage).

The Structure Stability add-on performs stability analysis of structures. It determines critical load factors and the corresponding stability modes.

The Construction Stages Analysis (CSA) add-on allows for considering the construction process of structures (member, surface, and solid structures) in RFEM.

The Time-Dependent Analysis (TDA) add-on allows you to consider the time-dependent material behavior of members. The long-term effects, such as creep, shrinkage, and aging, can influence the distribution of internal forces, depending on the structure.

In RFEM, the Geotechnical Analysis add-on uses properties from soil samples to determine the soil body to be analyzed. The accurate determination of soil conditions significantly affects the quality of the structural analysis of buildings.

The Building Model add-on for RFEM allows you to define and manipulate a building using stories. The stories can be adjusted in many ways afterwards. The information about stories and the entire model (center of gravity) is displayed in tables and graphics.

The two-part Optimization & Costs / CO2 Emission Estimation add-on finds suitable parameters for parameterized models and blocks via the artificial intelligence (AI) technique of particle swarm optimization (PSO) for compliance with common optimization criteria. Furthermore, this add-on estimates the model costs or CO2 emissions by specifying unit costs or emissions per material definition for the structural model.

The Multilayer Surfaces add-on allows you to define multilayer surface structures. The calculation can be carried out with or without the shear coupling.

The Stress-Strain Analysis add-on performs general stress analysis by calculating the existing stresses and comparing them with the limit stresses.

The Concrete Design add-on allows for various design checks according to international standards. You can design members, surfaces, and columns, as well as perform punching and deformation analyses.

The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.

The Masonry Design add-on for RFEM allows you to design masonry using the finite element method. It was developed as part of the research project titled DDMaS – Digitizing the Design of Masonry Structures. The material model represents the nonlinear behavior of the brick-mortar combination in the form of macro-modeling.

The Aluminum Design add-on performs the ultimate and serviceability limit state design checks of aluminum members according to various standards.

The Steel Joints add-on for RFEM allows you to analyze steel connections using an FE model. The FE model is generated automatically in the background and can be controlled via the simple and familiar input of components.

The Torsional Warping (7 DOF) add-on allows you to consider cross-section warping as an additional degree of freedom when calculating members.

The Structure Stability add-on performs the stability analysis of structures. It determines critical load factors and the corresponding stability modes.

The Torsional Warping (7 DOF) add-on allows for considering cross-section warping as an additional degree of freedom when calculating members.

The Stress-Strain Analysis add-on performs a general stress analysis by calculating the existing stresses and comparing them to the limit stresses.

Concrete Design add-on allows for various design checks of members and columns according to international standards.

The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.

The Aluminum Design add-on performs the ultimate and serviceability limit state design checks of aluminum members according to various standards.