New
FAQ 002605 EN-US 03/06/2019

Adrian Langhammer Design RF-CONCRETE

The higher the basic reinforcement is defined in RF-BETON surfaces, the greater the required reinforcement determined by the module. Why is that?

Answer

In the module there are options for the reinforcement to be taken into account for the lateral force detection. For the lateral force carrying capacity VRd, c, the attached longitudinal reinforcement has an influence. The options allow you to choose the longitudinal reinforcement with which the shear force proof is to be guided:

The lateral force verification can be performed using the following reinforcement:

  • mathematically required reinforcement
  • maximum value from required or existing reinforcement
  • automatically increasing the longitudinal reinforcement so that shear reinforcement is avoided

For example, if the second option is selected and the basic reinforcement can be used to avoid lateral force reinforcement, the basic reinforcement is selected and output as required.

Keywords

RF-CONCRETE Surfaces lateral force reinforcement lateral force detection basic reinforcement longitudinal reinforcement

Contact us

Contact Dlubal Software

Did you find your question?
If not, contact us via our free e-mail, chat, or forum support, or send us your question via the online form.

(267) 702-2815

info-us@dlubal.com

RFEM Concrete Structures
RF-CONCRETE 5.xx

Add-on Module

Design of reinforced concrete members and surfaces (plates, walls, planar structures, shells)

Price of First License
810.00 USD