Dlubal Software also has interfaces with the BIM software Tekla, so you can easily exchange data. There are three options available between RFEM 6 / RSTAB 9 and Tekla Structures: Frame models can be transferred based on files in both directions via the stp interface. An analysis model generated and carried out in Tekla Structures can be transferred to RFEM/RSTAB via a direct interface. Furthermore, physical models can be exchanged and aligned in both directions via another direct interface.
Planning with BIM | Integration into Tekla StructuresThe RWIND Simulation program for generating wind loads based on CFD can be utilized in different languages; for example, in:
- German
- English
- Czech
- Spanish
- French
- Italian
- Polish
- Portuguese
- Russian
Utilize the RWIND Simulation program to consider a surface roughness of the model surface by applying a modified wall boundary condition. The numerical model is based on the assumption that grains with a certain diameter are arranged homogeneously on the model surface, similar to sandpaper. The grain diameter is described with the parameter Ks and the distribution with the parameter Cs. By considering the wall roughness, the numerical flow simulation can capture reality more closely.
The volume space in RWIND Simulation can optionally be discretized with the second-order theory between the cells.
This extended approach usually results in more accurate results despite poorer convergence behavior.
The meshing algorithm of RWIND Simulation uses the boundary layer option to mesh the area near the model surface with a voluminous layer mesh. The number of layers is controlled by a user-defined parameter.
This fine mesh in the area of the model surface helps to represent the wind velocity close to the surface.