The objective of this thesis is the structural design and analysis of a timber tower for a wind turbine. The design of the tower should take into account the aspects of transport and construction, timber protection for external components, vibration analysis, and the fatigue failure of the structure.
|
Author
|
Thomas Blüm
|
|
University
|
Karlsruhe Institute of Technology, Germany,
Department of Timber Engineering and Building Structures |
The design of the tower should take into account the aspects of transport and construction, timber protection for external components, vibration analysis, and the fatigue failure of the structure.
Product Feature
Using the "Beam Panel" thickness type, you can model timber panel elements in 3D space. You just specify the surface geometry and the timber panel elements are generated using an internal member-surface construct, including the simulation of the connection flexibility.
You have the option to perform the fire resistance design of surfaces using the reduced cross-section method. The reduction is applied over the surface thickness. It is possible to perform the design checks for all timber materials allowed for the design.
For cross-laminated timber, depending on the type of adhesive, you can select whether it is possible for individual carbonized layer parts to fall off, and whether you can expect increased charring in certain layer areas.
.png?mw=512&hash=4e74affa9ad0c7b703151c5085ac9b8e59171c23)
Among others, the following cross-laminated timber manufacturers are available in the layer structure library:
By importing a structure from the layer structure library, all relevant parameters are adopted automatically. The library is continually updated.
The Timber Design add-on for RFEM 6 / RSTAB 9 is multi-purpose and combines a large number of additional elements. [*S16332764*] Timber Design Add-on for RFEM 6
Main Program
The new generation of 3D FEA software is used for the structural analysis of members, surfaces, and solids.
Add-On
The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.
Add-On
The Structure Stability add-on performs stability analysis of structures. It determines critical load factors and the corresponding stability modes.
Main Program
The modern 3D structural analysis and design program is suitable for the structural and dynamic analysis of beam structures as well as the design of concrete, steel, timber, and other materials.
Add-On
The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.
Stand-Alone Program
Timber design of single-span and wide-span glulam beams according to Eurocode 5 or DIN 1052
Stand-Alone Program
Timber design of simple, continuous, and Gerber beams with or without cantilever according to Eurocode 5 or DIN 1052
Stand-Alone Program
Timber design of rectangular and circular columns according to Eurocode 5 or DIN 1052
Stand-Alone Program
Timber design of coupled purlins and continuous beams according to Eurocode 5 or DIN 1052
Stand-Alone Program
Timber design of three-hinged frames with finger joint connections according to Eurocode 5 or DIN 1052
Stand-Alone Program
Timber design of stiffening truss bracing according to Eurocode 5 or DIN 1052
Stand-Alone Program
Timber design of flat, monopitch, and duopitch roofs according to Eurocode 5
Add-On
The Steel Design add-on performs the ultimate and serviceability limit state design checks of steel members according to various standards.
.png?mw=600&hash=49b6a289915d28aa461360f7308b092631b1446e)
Add-On
The Steel Joints add-on for RFEM allows you to analyze steel connections using an FE model. The FE model is generated automatically in the background and can be controlled via the simple and familiar input of components.
Add-On
The Stress-Strain Analysis add-on performs general stress analysis by calculating the existing stresses and comparing them with the limit stresses.
Add-On
The two-part Optimization & Costs / CO2 Emission Estimation add-on finds suitable parameters for parameterized models and blocks via the artificial intelligence (AI) technique of particle swarm optimization (PSO) for compliance with common optimization criteria. Furthermore, this add-on estimates the model costs or CO2 emissions by specifying unit costs or emissions per material definition for the structural model.
Add-On
The Steel Design add-on performs the ultimate and serviceability limit state design checks of steel members according to various standards.
Add-On
The Structure Stability add-on performs the stability analysis of structures. It determines critical load factors and the corresponding stability modes.
Add-On
The Stress-Strain Analysis add-on performs a general stress analysis by calculating the existing stresses and comparing them to the limit stresses.
Add-On
The two-part Optimization & Costs / CO2 Emission Estimation add-on finds suitable parameters for parameterized models and blocks via the artificial intelligence (AI) technique of particle swarm optimization (PSO) for compliance with common optimization criteria. Furthermore, this add-on estimates the model costs or CO2 emissions by specifying unit costs or emissions per material definition for the structural model.
Cross-Section Properties
The stand-alone program RSECTION determines the section properties for any thin-walled and massive cross-sections.
Main Program
Structural engineering software for a finite element analysis (FEA) of planar and spatial structural systems consisting of plates, walls, shells, members (beams), solids, and contact elements
Add-On Module
Plastic design of cross-sections according to the Partial Internal Forces Method (PIFM) and Simplex Method
Add-On Module
Fatigue design of members and sets of members according to EN 1993-1-9
Add-On Module
Generation of geometrically complex 3D tower structures, such as lattice towers and radio masts
Add-On Module
Generation of the equipment for lattice towers of mobile operators
Add-On Module
Generation of the wind, ice, and variable loads for lattice towers
Add-On Module
Determination of effective lengths for lattice towers
Add-On Module
Design of triangular and quadrilateral lattice towers according to the European standards
Add-On Module
Design of nominally pinned bolted connections of members used in lattice towers according to Eurocode 3
Main Program
Structural engineering software for design of frame, beam, and truss structures, as well as for linear and nonlinear calculations of internal forces, deformations, and support reactions
Add-On Module
Fatigue design of members and sets of members according to EN 1993-1-9
Add-On Module
Plastic design of cross-sections according the Partial Internal Forces Method (PIFM) and Simplex Method
Add-On Module
Generation of geometrically complex 3D tower structures, such as lattice towers and radio masts
Add-On Module
Generation of equipment for lattice towers of mobile operators
Add-On Module
Generation of wind, ice, and variable loads for lattice towers
Add-On Module
Determination of effective lengths for lattice towers
Add-On Module
Design of triangular and quadrilateral lattice towers according to the European standards
Add-On Module
Design of nominally pinned bolted connections of members used in lattice towers according to Eurocode 3
.png?mw=350&hash=c80fc4b2f478e279fb08dd1037bd77d920f7f79c)
www.pirminjung.ch.png?mw=350&hash=bae0a95a4d6e4043d593da4e25ea65752602b503)
