30 Results
View Results:
- Occurred
- Recorded
Online Training on Seismic Design According to Eurocode 8 Using the FEA Program RFEM
In this training, you will learn the basics of dynamic analysis and the most important verification methods for seismic design. Using a practical example, the multi-modal response spectrum analysis and its implementation in RFEM and the associated dynamic analysis add-ons will be explained. During the training, each participant can ask questions via chat at any time.
In this training, you will learn the basics of dynamic analysis and the most important verification methods for seismic design. Using a practical example, the multi-modal response spectrum analysis and its implementation in RFEM and the associated dynamic analysis add-ons will be explained. During the training, each participant can ask questions via chat at any time.
2023-09-14
|
English
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR zzgl. MwSt.
|
Online training on timber structure design according to DIN EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2023-08-31
|
English
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR zzgl. MwSt.
|
- Occurred
- Recorded
Online Training on Steel Design According to DIN EN 1993-1-1 | Theory and Practical Examples
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2023-08-03
|
English
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR zzgl. MwSt.
|
- Occurred
- Recorded
Online Training on Seismic Design According to Eurocode 8 Using the FEA Program RFEM
In this training, you will learn the basics of dynamic analysis and the most important verification methods for seismic design. Using a practical example, the multi-modal response spectrum analysis and its implementation in RFEM and the associated dynamic analysis add-ons will be explained. During the training, each participant can ask questions via chat at any time.
In this training, you will learn the basics of dynamic analysis and the most important verification methods for seismic design. Using a practical example, the multi-modal response spectrum analysis and its implementation in RFEM and the associated dynamic analysis add-ons will be explained. During the training, each participant can ask questions via chat at any time.
2023-06-29
|
English
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR zzgl. MwSt.
|
Online training on timber structure design according to DIN EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2023-06-22
|
English
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR zzgl. MwSt.
|
- Occurred
- Recorded
Online Training on Steel Design According to DIN EN 1993-1-1 | Theory and Practical Examples
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2023-05-16
|
English
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR zzgl. MwSt.
|
Online Training on Seismic Design According to Eurocode 8 Using the FEA Program RFEM
In this training, you will learn the basics of dynamic analysis and the most important verification methods for seismic design. Using a practical example, the multi-modal response spectrum analysis and its implementation in RFEM and the associated dynamic analysis add-ons will be explained. During the training, each participant can ask questions via chat at any time.
In this training, you will learn the basics of dynamic analysis and the most important verification methods for seismic design. Using a practical example, the multi-modal response spectrum analysis and its implementation in RFEM and the associated dynamic analysis add-ons will be explained. During the training, each participant can ask questions via chat at any time.
2023-03-30
|
English
|
9:00 AM - 1:00 PM CEST
|
250.00 EUR zzgl. MwSt.
|
Online training on timber structure design according to DIN EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2023-03-16
|
English
|
9:00 AM - 1:00 PM CET
|
250.00 EUR zzgl. MwSt.
|
- Occurred
- Recorded
Online Training on Steel Design According to DIN EN 1993-1-1 | Theory and Practical Examples
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2023-03-02
|
English
|
9:00 AM - 1:00 PM CET
|
250.00 EUR zzgl. MwSt.
|
Online training on timber structure design according to DIN EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2022-12-08
|
English
|
9:00 AM - 1:00 PM CET
|
195.00 EUR zzgl. MwSt.
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2022-12-06
|
German
|
8:30 AM - 12:30 PM CET
|
195.00 EUR plus VAT
|
- Occurred
- Recorded
Online Training on Seismic Design According to Eurocode 8 Using the FEA Program RFEM
In this training, you will learn the basics of dynamic analysis and the most important verification methods for seismic design. Using a practical example, the multi-modal response spectrum analysis and its implementation in RFEM and the associated dynamic analysis add-ons will be explained. During the training, each participant can ask questions via chat at any time.
2022-11-23
|
English
|
9:00 AM - 1:00 PM CET
|
195.00 EUR zzgl. MwSt.
|
Online Training on Steel Design According to DIN EN 1993-1-1 | Theory and Practical Examples
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2022-11-17
|
English
|
9:00 AM - 1:00 PM CET
|
250.00 EUR zzgl. MwSt.
|
Training on Structural Analysis and Design of Steel Structures According to EN 1993-1-1 with Structural FEA Software RFEM 6
This training course will show you how to work efficiently with the structural analysis program RFEM. You will learn important functions and modeling options on practical examples. Also, you can ask any question.
This training course will show you how to work efficiently with the structural analysis program RFEM. You will learn important functions and modeling options on practical examples. Also, you can ask any question.
2022-10-13
|
Spanish
|
3:00 PM - 5:00 PM CEST
|
100.00 EUR excluding VAT
|
- Occurred
- Recorded
Online Training on Seismic Design According to Eurocode 8 Using the FEA Program RFEM
In this training, you will learn the basics of dynamic analysis and the most important verification methods for seismic design. Using a practical example, the multi-modal response spectrum analysis and its implementation in RFEM and the associated dynamic analysis add-ons will be explained. During the training, each participant can ask questions via chat at any time.
2022-09-21
|
English
|
9:00 AM - 1:00 PM CEST
|
195.00 EUR zzgl. MwSt.
|
- Occurred
- Recorded
Basic Online Training on Structural Dynamics and Seismic Design with Structural FEA Software RFEM
In this training, you will learn the basics of structural dynamics and the most important design methods for seismic design. A practical example is used to explain the multi-modal response spectrum method and its implementation in RFEM and the corresponding add-ons for dynamic analysis. Open questions can be discussed.
In this training, you will learn the basics of structural dynamics and the most important design methods for seismic design. A practical example is used to explain the multi-modal response spectrum method and its implementation in RFEM and the corresponding add-ons for dynamic analysis. Open questions can be discussed.
2022-09-20
|
German
|
8:30 AM - 12:30 PM CEST
|
195.00 EUR plus VAT
|
Online training on timber structure design according to DIN EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2022-09-15
|
English
|
9:00 AM - 1:00 PM CEST
|
195.00 EUR zzgl. MwSt.
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2022-09-13
|
German
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR plus VAT
|
Online Training on Steel Design According to DIN EN 1993-1-1 | Theory and Practical Examples
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Target is to give an introduction to Eurocode 3, Part 1-1. The application of the steel design add-ons for the dimensioning according to EC 3 will be explained using selected practical examples.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2022-09-08
|
English
|
9:00 AM - 1:00 PM CEST
|
250.00 EUR zzgl. MwSt.
|
Online Training on Design of Timber Structures According to EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you are getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you are getting the most out of your Dlubal programs.
2022-09-06
|
|
9:00 AM - 1:00 PM CEST
|
120.00 EUR incl. tax
|