Konstrukcja z profilu I jest osadzona w podporach widłowych. The axial rotation is restricted on both ends while warping is enabled. The structure is loaded by two transverse forces in the middle. The verification example is based on the example introduced by Gensichen and Lumpe.
Płaska kratownica składająca się z czterech nachylonych prętów i jednego pręta pionowego jest obciążona w górnym węźle siłą pionową i siłą skierowaną prostopadle do płaszczyzny. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Rura o przekroju rurowym jest obciążona ciśnieniem wewnętrznym. This internal pressure causes axial deformation of the pipe (the Bourdon effect). Determine the axial deformation of the pipe endpoint.
Układ jednomasowy z dashpotem jest poddawany stałemu obciążeniu. Determine the spring force, damping force, and inertial force at the given test time. In this verification example, the Kelvin--Voigt dashpot (namely, a spring and a damper element in serial connection) is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.
Prosty oscylator składa się z masy m (rozpatrywanej tylko w kierunku x) i liniowej sprężystości sztywności k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
Stalowy pręt między dwiema sztywnymi podporami ze szczeliną jest obciążony różnicą temperatur. While neglecting self‑weight, determine the total deformation of the rod and its internal axial force.
Dwukondygnacyjna, jednonawowa konstrukcja szkieletowa jest poddawana obciążeniu sejsmicznemu. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
Przykład ten służy do zademonstrowania ograniczenia membrany. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Wykazać, że połączenie różnych elementów wymiarowych nie ma wpływu na wyniki. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.