Konstrukcja z profilu I jest osadzona w podporach widłowych. The axial rotation is restricted on both ends while warping is enabled. The structure is loaded by two transverse forces in the middle. The verification example is based on the example introduced by Gensichen and Lumpe.
Symetryczna płytka konstrukcja składa się z ośmiu równych prętów kratownicowych, osadzonych w podporach przegubowych. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Konstrukcja składa się z czterech prętów kratownicowych, osadzonych w podporach przegubowych. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Konstrukcja kratownicowa składa się z trzech prętów (jeden stalowych i dwa miedziane) połączonych sztywnym prętem. The structure is loaded by a concentrated force and a temperature difference. While neglecting self‑weight, determine the total deflection of the structure.
Wspornik o przekroju prostokątnym ma na końcu masę. Furthermore, it is loaded by an axial force. Calculate the natural frequency of the structure. Neglect the self‑weight of the cantilever and consider the influence of the axial force for the stiffness modification.
Dwukondygnacyjna, jednonawowa konstrukcja szkieletowa jest poddawana obciążeniu sejsmicznemu. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
Przykład ten służy do zademonstrowania ograniczenia membrany. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Konstrukcja składa się z dwóch kratownic o różnej długości, osadzonych w podporach przegubowych. The structure is loaded by concentrated force. The self-weight is neglected. Determine the relationship between the loading force and the deflection, considering large deformations.
Konstrukcja z profilu I jest w pełni utwierdzona na lewym końcu i osadzona w podporze przesuwnej na prawym końcu. The structure consists of two segments. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Cztery słupy są zamocowane na dole, a od góry połączone sztywnym blokiem. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Stalowa lina lub membrana ze sworzniami na obu końcach jest obciążona obciążeniem rozłożonym. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Konstrukcja składa się z dwóch kratownic wbudowanych w podpory przegubowe. The structure is loaded by concentrated force. The self-weight is neglected. Determine the relationship between the loading force and the deflection, considering large deformations.
Konstrukcja wykonana z kratownic o przekroju dwuteowym jest podparta na obu końcach za pomocą sprężynowych podpór przesuwnych i obciążona siłami poprzecznymi. The self-weight is neglected in this example. Determine the deflection of the structure, the bending moment, the normal force in the given test points, and the horizontal deflection of the spring supports.
Stalowy wspornik o prostokątnym przekroju jest w pełni zamocowany po jednej stronie, a po drugiej stronie jest swobodny. The aim of this verification example is to determine the natural frequencies of the structure.
Płaska konstrukcja kratownicowa jest swobodnie podparta. The aim of this verification example is to determine the natural frequencies of the structure.