Wspornik wykonany z pręta okrągłego jest obciążony mimośrodową siłą osiową. Determine the maximum vertical deflection of the console using the geometrically linear and second-order analysis.
Układ jednomasowy z dashpotem jest poddawany stałemu obciążeniu. Determine the spring force, damping force, and inertial force at the given test time. In this verification example, the Kelvin--Voigt dashpot (namely, a spring and a damper element in serial connection) is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.
Naczynie grubościenne jest obciążone takim ciśnieniem wewnętrznym, że osiąga stan sprężysto-plastyczny. While neglecting self‑weight, the analytical and numerical solutions for the radial position of the plastic zone border (under the Tresca hypothesis) are determined and compared.
Wspornik jest obciążony siłą poprzeczną i osiową na prawym końcu i jest w pełni zamocowany na lewym końcu. The problem is described by the following set of parameters. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
Konstrukcja z profilu I jest w pełni utwierdzona na lewym końcu i osadzona w podporze przesuwnej na prawym końcu. The structure consists of two segments. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Belka podparta przegubowo na obu końcach jest obciążona w środku siłą skupioną. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Stalowa belka o przekroju kwadratowym jest obciążana siłą osiową i obciążeniem rozłożonym. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.