Płaska kratownica składająca się z czterech nachylonych prętów i jednego pręta pionowego jest obciążona w górnym węźle siłą pionową i siłą skierowaną prostopadle do płaszczyzny. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Najpierw zostaje ugięty układ jednomasowy z luzem i dwiema sprężynami. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Wspornik wykonany z pręta okrągłego jest obciążony mimośrodową siłą osiową. Determine the maximum vertical deflection of the console using the geometrically linear and second-order analysis.
Wspornik wykonany z okrągłego pręta jest obciążony mimośrodową siłą poprzeczną. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Wspornik wykonany z pręta okrągłego jest obciążony mimośrodem obciążeniem równomiernym. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Poniższy przykład obliczeniowy jest oparty na przykładzie obliczeniowym 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Symetryczna płytka konstrukcja składa się z ośmiu równych prętów kratownicowych, osadzonych w podporach przegubowych. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Konstrukcja składa się z czterech prętów kratownicowych, osadzonych w podporach przegubowych. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Układ jednomasowy z dashpotem jest poddawany stałemu obciążeniu. Determine the spring force, damping force, and inertial force at the given test time. In this verification example, the Kelvin--Voigt dashpot (namely, a spring and a damper element in serial connection) is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.
Układ jednomasowy z kotłem typu 'dashpot' jest poddawany stałemu obciążeniu. Determine the deflection and velocity of the dashpot endpoint in the given test time.
Wahadło matematyczne składa się z liny o zerowym ciężarze i punktu masowego na jej końcu. The pendulum is initially deflected. Determine the angle of the rope at the given test time.
Prosty oscylator składa się z masy m (rozpatrywanej tylko w kierunku x) i liniowej sprężystości sztywności k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
Wspornik jest obciążony siłą poprzeczną i osiową na prawym końcu i jest w pełni zamocowany na lewym końcu. The problem is described by the following set of parameters. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
Konstrukcja z profilu I jest w pełni utwierdzona na lewym końcu i osadzona w podporze przesuwnej na prawym końcu. The structure consists of two segments. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Wspornik jest obciążony momentem na jego wolnym końcu. Using the geometrically linear analysis and large deformation analysis, and neglecting the beam's self-weight, determine the maximum deflections at the free end. The verification example is based on the example introduced by Gensichen and Lumpe.
Długa, cienka belka przenosi masę skupioną i jest obciążona siłą zależną od czasu. It is simply supported. The problem is described using the following parameters. Determine the deflections in the given test times.
Analiza czasowa belki wspornikowej (układ SDOF) wzbudzanej przez funkcję okresową. Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.
Stalowa lina lub membrana ze sworzniami na obu końcach jest obciążona obciążeniem rozłożonym. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Należy określić moment zginający, działający na swobodnym końcu wspornika, który nada prętowi kształt kołowy. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
Belka podparta przegubowo na obu końcach jest obciążona w środku siłą skupioną. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Stalowa belka o przekroju kwadratowym jest obciążana siłą osiową i obciążeniem rozłożonym. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Stalowa belka obciążona osiowo o kwadratowym przekroju jest z jednej strony zamocowana przegubowo, a z drugiej podparta sprężynami. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.