Železobetonová deska uvnitř budovy se má navrhnout jako pás o 1,0 m s pruty. Jedná se o jednosměrně pnutou podlahovou desku přes dvě pole. Deska je upevněna volně otočnými podpěrami na zděných stěnách. Střední podpěra má šířku 240 mm, zatímco šířka obou krajních podpěr je 120 mm. Na obě pole působí užitné zatížení kategorie C: obecní prostory.
A symmetrical shallow structure is made of eight equal truss members, which are embedded into hinge supports. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. Vlastní tíha se v tomto příkladu nezohledňuje. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Konstrukce se skládá ze čtyř prutů, které jsou uloženy na kloubových podporách. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. Vlastní tíhu zanedbáme. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Analyticky stanovíme torzní konstantu pro průřez trubky (kruhovou oblast) a výsledky porovnáme s numerickým řešením v programech RFEM 5 a RSTAB 8 pro různé tloušťky stěn.