Structural Analysis Software for Process Manufacturing Plants
3D Finite Element Analysis and Design
Structural engineering FEA software RFEM is the basis of a modular software system. The main program RFEM is used to define structures, materials, and loads for planar and spatial structural systems consisting of plates, walls, shells and members. The program also allows you to create combined structures as well as model solid and contact elements.
Analysis & Design of Frame/Beam/Truss Structures
Structural frame analysis and design software RSTAB contains a similar range of functions as RFEM, with special attention to beam, frame, or truss structures. Therefore, it is very easy to use and for many years it has been the best choice for structural analysis.
Wind Simulation & Wind Load Generation
Use the stand-alone program RWIND Simulation for complex structures. This program simulates wind flows around any structures by means of a digital wind tunnel.
The generated wind loads acting on these objects can be imported to RFEM or RSTAB.
More Add-on Modules for Industrial and Plant Engineering Designs
Find more useful add-on modules for structural analysis and design of industrial and plant engineering under the Steel Structures industry.
Add-on Modules for Piping Analysis
For piping modeling and design in RFEM, there are the RF‑PIPING and RF‑PIPING add‑on modules available.
Interfaces for Data Exchange
The structural analysis software provided by Dlubal can be seamlessly integrated into the Building Information Modeling (BIM) process. A variety of interfaces allows you to exchange data from digital building models with RFEM or RSTAB.
Support and Learning
Customer service is one of the fundamental pillars of the Dlubal Software company philosophy. We also offer you all the support you need for your daily work.
Contact us
Do you have any questions about our products or need advice on selecting the products needed for your projects?
Contact us via our free e-mail, chat, or forum support or find various suggested solutions and useful tips on our FAQ page.
![Stress-Strain Curve in the Tension Area According to [1] to Determine Internal Forces and Deformations in Nonlinear Methods](/-/media/Images/website/img/000001-010000/008701-008800/008788.png?la=en-US&mlid=BEDB75F95C384C80979F601673392F3E&hash=15BA7D7C53D802E12CEA755046362B8CA58DB09E)
![Stress-Strain Curve on the Tension Side According to [1] for Cross-Section Design in the Ultimate Limit State](/-/media/Images/website/img/000001-010000/008701-008800/008789.png?la=en-US&mlid=F9D2D35AC2D544D0838DE9AD7C7C619F&hash=2903C8311D5287A0064FAFB0811CDACBBC8E29E8)
![Stress-Strain Diagram According to [4] for the Compression Zone: a) for the Nonlinear Calculation; b) for the Cross-Section Design](/-/media/Images/website/img/000001-010000/008701-008800/008790.png?la=en-US&mlid=7B66E8A666184FE1A3030AB873686901&hash=ECB08187FD8FC918CC38FC98FC22E83432B3C9CA)
- How do I determine wind loads on structures of any shape?
- Two solution methods are available for the nonlinear time history analysis in the RF-/DYNAM Pro module. What is the difference between them?
- How do I define temperature loads on a composite beam?
- What is the best way to model two welded members that rest parallel to each other?
- My aim is to mesh a circular hole plate in a mapped way. Is such a meshing possible in RFEM?
- How can I optimize the calculation time in CRANEWAY?
- How do I create a frame joint with taper in JOINTS Steel - Rigid?
- How can I create a drilled beam in RFEM?
- How can I additionally model welds for the connection of two surfaces with a contact solid?
- In connection with the calculation according to the large deformation analysis, I get significantly smaller deformations than for the calculation according to the linear static or second-order analysis. How is this possible?
Recommended for Process Manufacturing Plants
Main Program
Structural engineering software for finite element analysis (FEA) of planar and spatial structural systems consisting of plates, walls, shells, members (beams), solids and contact elements
3,540.00 USD
Main Program
The structural engineering software for design of frame, beam and truss structures, performing linear and nonlinear calculations of internal forces, deformations, and support reactions
2,550.00 USD
Add-on Module
Stress analysis of steel surfaces and members
1,030.00 USD
Add-on Module
Design of steel members according to Eurocode 3
1,480.00 USD
Add-on Module
Design of steel members according to the American standard ANSI/AISC 360
1,480.00 USD
Add-on Module
Design of steel members according to the Swiss standard SIA 263
1,480.00 USD
Add-on Module
Design of steel members according to the Indian standard IS 800:2007
1,480.00 USD
Add-on Module
Design of steel members according to the British standard BS 5950-1:2000 or British Annex BS EN 1993-1-1
1,480.00 USD
Add-on Module
Design of steel members according to the Chinese standard GB 50017-2003
1,480.00 USD
Add-on Module
Design of steel members according to the Canadian standard CSA S16
1,480.00 USD
Add-on Module
Design of steel members according to the Australian standard AS 4100-1998
1,480.00 USD
Add-on Module
Design of steel members according to the Mexican standard NTC-DF 2004
1,480.00 USD
Add-on Module
Design of steel members according to the Russian standard SP 16.13330.2011
1,480.00 USD
Add-on Module
Design of steel members according to the South African standard SANS 10162-1:2011
1,480.00 USD
Add-on Module
Design of steel members according to the Brazilian standard ABNT NBR 8800:2008
1,480.00 USD
Add-on Module
Design of steel members according to Code of Practice for the Structural Use of Steel 2011 (Buildings Department - Hong Kong)
1,480.00 USD
Module Extension for RF-STEEL EC3 and RF-STEEL AISC
Warping torsion analysis according to the second-order theory with 7 degrees of freedom
850.00 USD
Module Extension for RF-STEEL EC3
Plastic design of cross-sections according the Partial Internal Forces Method (PIFM) and Simplex Method
850.00 USD
Add-on Module
Stability analysis according to the eigenvalue method
1,030.00 USD
Add-on Module
Stability analysis according to the eigenvalue method
670.00 USD
Add-on Module
Generation of equivalent geometric imperfections and pre-deformed initial structures for nonlinear calculations
760.00 USD
Add-on Module
Fatigue design of members and sets of members according to EN 1993-1-9
1,120.00 USD
Stand-Alone Program
Design of crane runway girders according to EN 1993-6 and DIN 4132
1,480.00 USD
Add-on Module
Plate buckling analysis of rectangular plates with or without stiffeners
900.00 USD
Stand-Alone Program
Properties and stresses of thin-walled and cold-formed cross-sections
1,300.00 USD
Add-on Module
Piping design and pipe stress analysis
1,480.00 USD
