RF-/STEEL EC3 | Input
RF-/STEEL EC3 imports the cross-sections defined in RFEM/RSTAB automatically. It is possible to design all thin-walled cross-sections. The program automatically selects the most efficient method conforming to standards.
The ultimate limit state design takes into account several loads and you can select the interaction designs available in the standard.
An essential part of the analysis according to Eurocode 3 is the classification of designed cross-sections into the Classes 1 to 4. In this way, you can check the limitation of the design and rotational capacity by means of the local buckling of cross-section parts. RF-/STEEL EC3 determines the c/t-ratios of the cross-section parts subjected to compression stress and performs the classification automatically.
For the stability analysis, you can specify for each member or set of members whether flexural buckling occurs in the y- and/or z-direction. You can also define additional lateral restraints in order to represent the model close to reality.
RF-/STEEL EC3 add-on module automatically determines the slenderness ratios and elastic critical buckling loads on the basis of boundary conditions. The elastic critical moment for lateral-torsional buckling required for the lateral-torsional buckling analysis can be determined automatically or specified manually. Also the load application point of transverse loads, affecting the torsional resistance, can be considered by setting of details. In addition, you can take into account rotational restraints (for example trapezoidal sheeting and purlins) and shear panels (for example trapeziodal sheeting and bracing).
In modern construction using more and more slender cross-sections, the serviceability limit state represents an important
factor in structural calculations.
RF-/STEEL EC3 assigns load cases, load combinations, and result combinations to different design situations. The respective limit deformations are preset in National Annex and can be adjusted, if necessary. In addition, it is possible to define reference lengths and precambers for the design.
Do you have any questions or need advice?
Contact us or find various suggested solutions and useful tips on our FAQ page.