41 Results
View Results:
- Occurred
- Recorded
Free Webinar | Reinforced Concrete Tank Design in RFEM 6 (USA)
This webinar will provide an introduction to reinforced concrete tank analysis and design in RFEM 6.
2023-01-19
|
English (US)
|
2:00 PM - 3:00 PM EST
|
Free
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2022-12-06
|
German
|
8:30 AM - 12:30 PM CET
|
195.00 EUR plus VAT
|
International conference on contemporary design of structures. The main goal of the 26th Conference is to provide structural engineers and other experts with up-to-date information on current and future trends in design of building structures, knowledge learned from solved desing analyses, remediation, reinforcement, reconstruction, additional modifications, and additional changes of load-bearing structures.
2022-09-29 - 2022-09-30
|
|
|
Free
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2022-09-13
|
German
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR plus VAT
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2022-06-14
|
German
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR plus VAT
|
Online Training on Design of Timber Structures According to DIN EN 1995-1-1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2022-03-15
|
German
|
8:30 AM- 12:30 PM CET
|
250.00 EUR plus VAT
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2021-11-24
|
German
|
8:30 AM - 12:30 PM CET
|
250.00 EUR plus VAT
|
International conference on contemporary design of structures. The main goal of the jubilee 25th Conference is to provide structural engineers and other experts with up-to-date information on current and future trends in design of building structures, knowledge learned from solved desing analyses, remediation, reinforcement, reconstruction, additional modifications, and additional changes of load-bearing structures.
2021-10-14 - 2021-10-15
|
|
|
Free
|
Online Training on Timber Design According to DIN EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2021-09-23
|
English
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR zzgl. MwSt.
|
- Occurred
- Recorded
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2021-09-21
|
German
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR plus VAT
|
Free Online Training on Design of Timber Structures According to PN EN 1995-1-1
Our online group training provide you with the opportunity to gain expert knowledge and to ensure you are getting the most out of your Dlubal Software programs.
Our online group training provide you with the opportunity to gain expert knowledge and to ensure you are getting the most out of your Dlubal Software programs.
2021-09-15
|
|
9:30 AM - 1:00 PM CEST
|
Free
|
Free online basic training on the FEM structural analysis program RFEM for students
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. You will learn important functions and modeling options by means of practical examples. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. Therefore, the structural calculations in timber, steel and reinforced concrete will be done using practical examples.
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. You will learn important functions and modeling options by means of practical examples. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. Therefore, the structural calculations in timber, steel and reinforced concrete will be done using practical examples.
2021-06-15
|
|
2:00 PM - 4:30 PM CEST
|
Free
|
Free basic online training on the FEM structural analysis program RFEM for students
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. Using practical examples, you will learn important functions and modeling options. Open questions can be discussed.
The third part of this online training focuses mainly on the design of structural components. Using practical examples, structural calculations in timber, steel and reinforced concrete are described.
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. Using practical examples, you will learn important functions and modeling options. Open questions can be discussed.
The third part of this online training focuses mainly on the design of structural components. Using practical examples, structural calculations in timber, steel and reinforced concrete are described.
2021-06-14
|
|
09:30 - 12:00 CEST
|
Free
|
Free online training on the FEM structural analysis program RFEM and Revit for students of TU Munich
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. You will learn important functions and modeling options by means of practical examples. Open questions can be discussed.
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. You will learn important functions and modeling options by means of practical examples. Open questions can be discussed.
2021-06-04
|
|
11:00 AM - 3:30 PM CEST
|
Free
|
Online training on the design of timber structures according to DIN EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2021-05-20
|
English
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR net, excluding VAT
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2021-05-18
|
German
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR plus VAT
|
Online training for the dimensioning of timber structures according to EN 1995-1-1
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2021-03-17
|
English
|
8:30 AM - 12:30 PM CET
|
250.00 EUR net, excluding VAT
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2021-03-15
|
German
|
8:30 AM - 12:30 PM CET
|
250.00 EUR plus VAT
|
- Occurred
- Recorded
Join this online training to learn more about timber design according to EN 1995-1-1.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
Online group training sessions provide the opportunity to gain expert knowledge and to ensure you’re getting the most out of your Dlubal programs.
2020-12-18
|
English
|
8:30 AM - 12:30 PM CET
|
250.00 EUR incl. tax
|
Free online basic training on the FEM structural analysis program RFEM for students
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. You will learn important functions and modeling options by means of practical examples. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. Therefore, the structural calculations in timber, steel and reinforced concrete will be done using practical examples.
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. You will learn important functions and modeling options by means of practical examples. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. Therefore, the structural calculations in timber, steel and reinforced concrete will be done using practical examples.
2020-12-11
|
|
3:00 PM - 6:00 PM CET
|
Free
|
Free basic online training on the FEM structural analysis program RFEM for students
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. Using practical examples, you will learn important functions and modeling options. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. In this way, the structural calculations in timber, steel and reinforced concrete will be described using practical examples.
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. Using practical examples, you will learn important functions and modeling options. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. In this way, the structural calculations in timber, steel and reinforced concrete will be described using practical examples.
2020-12-07
|
|
09:00 - 12:00 CET
|
Free
|
Free online basic training on the FEM structural analysis program RFEM for students
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. You will learn important functions and modeling options by means of practical examples. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. Therefore, the structural calculations in timber, steel and reinforced concrete will be done using practical examples.
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. You will learn important functions and modeling options by means of practical examples. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. Therefore, the structural calculations in timber, steel and reinforced concrete will be done using practical examples.
2020-11-30
|
|
9:00 AM - 12:00 PM CET
|
Free
|
Free basic online training on the FEM structural analysis program RFEM for students
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. Using practical examples, you will learn important functions and modeling options. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. In this way, the structural calculations in timber, steel and reinforced concrete will be described using practical examples.
This training will enable you as a student to work efficiently with the FEM structural analysis program RFEM. Using practical examples, you will learn important functions and modeling options. Open questions can be discussed.
The focus of the third part of this online training is mainly on the design of structural components. In this way, the structural calculations in timber, steel and reinforced concrete will be described using practical examples.
2020-11-27
|
|
09:00 - 12:00 CET
|
Free
|
Online Training on Design of Timber Structures According to DIN EN 1995‑1‑1
With online group training, you can enhance your professional knowledge, and you will ensure that your investment in the software pays off to the maximum.
2020-10-15
|
German
|
8:30 AM - 12:30 PM CEST
|
250.00 EUR incl. tax
|
- Occurred
- Recorded
Free Webinar | Other Topics in RFEM Including BIM
The webinar covers BIM issues in RFEM. Webinar in Polish.
2019-11-28
|
Polish
|
3:00 PM - 4:00 PM CET
|
Free
|
Content
- Introduction to RFEM and RF-LAMINATE add-on module
- Analysis of CLT structure
- Design of CLT structure per CSA O86:14
- Tips for optimal modeling
2019-11-06
|
|
|
Free
|
Free webinar | Advanced capabilities of RFEM
During the webinar, the advanced capabilities of RFEM will be presented on a practical example. Webinar in Polish.
2019-10-31
|
|
3:00 PM - 4:00 PM CEST
|
Free
|
Free webinar | Introduction to RFEM based on FEM
In the first of three webinars, we will provide a general introduction to the DLUBAL platform as well as the basic functions of the flagship RFEM and its selected add-on modules, based on a practical example. Webinar in Polish.
2019-10-10
|
|
3:00 PM - 4:00 PM CEST
|
Free
|
Content:
- Collaboration with Revit/Tekla using direct interface
- Bidirectional round-trip flow with model updating between programs
- Helpful tips to optimize collaboration and avoid mistakes
- Other BIM options available
- Video in preparation
2019-09-19
|
|
|
Free
|
Contents:
- Global analysis of buckling in bar frames with RF-STABILITY
- Use of line releases for nonlinear bar-surface connections
- Dealing with the singularities in the MEF for the design of reinforced concrete slabs
- Non-linear analysis of the material with plastic laws in steel connections
- Video in preparation
2019-09-05
|
|
4pm
|
Free
|