Form-Finding and Calculation of Membrane Structures in RFEM 6
Information About Free Webinar
Webinars provide the opportunity to gain expert knowledge and to ensure you're getting the most out of your Dlubal programs.
Date | Time
Free Webinar | Form-Finding and Calculation of Membrane Structures in RFEM
This webinar shows how to use the structural analysis program RFEM 6 to model and calculate membrane structures.
Below, under Models to Download, you will find the model used in the webinar. This will allow you to independently follow the webinar step by step with the provided model after the presentation is complete.
Additionally, each participant will receive a certificate of completion for the hours attended.
|-||Membrane structure modeling using the Form-Finding add-on|
|-||Consideration of construction stages using the Construction Stages Analysis (CSA) add-on|
|-||Entering loads including wind load application using RWIND 2|
|-||Design and documentation|
Please NoteDuring the presentation, you will have the opportunity to ask individual questions.
A computer with internet access is required as well as a loudspeaker, headphones, headset or any other listening device. Alternatively, you can dial in using a phone line for audio connection.
Take advantage of this free webinar and sign up today! The number of participants is limited. After your registration is complete, you will receive a confirmation email including information on how to join the webinar.
Dipl.-Ing. (FH) Andreas Hörold
Marketing & Public Relations
Mr. Hörold takes care of the Dlubal Software website, creates press releases as well as marketing materials, and is the moderator of the German and English webinars.
Dipl.-Ing. (BA) Andreas Niemeier, M.Eng.
Mr. Niemeier is responsible for the development of RFEM, RSTAB, and the add-on modules for tensile membrane structures. Also, he is responsible for quality assurance and customer support.
Do you have questions about our webinars? Need advice on which webinars are best for your upcoming design project? Contact us via phone, email, chat or forum or find suggested solutions and useful tips on our FAQ page available 24/7.Frequently Asked Questions (FAQ)
RFEM 6 includes the Form-Finding add-on to determine the equilibrium shapes of surface models subjected to tension and members subjected to axial forces. Activate this add-on in the model's Base Data and use it to find the geometric position in which the prestress of lightweight structures is in equilibrium with the existing boundary conditions.
Membrane Roof and Cable Net Structures, Deformation Animation in RFEM with RF-FORM-FINDING Add-on Module.
Compared to the RF-FORM-FINDING add-on module (RFEM 5), the following new features have been added to the Form-Finding add-on for RFEM 6:
- Specification of all form-finding load boundary conditions in one load case
- Storage of form-finding results as initial state for further model analysis
- Automatic assignment of the form-finding initial state via combination wizards to all load situations of a design situation
- Additionally form-finding geometry boundary conditions for members (unstressed length, maximum vertical sag, low-point vertical sag)
- Additional form-finding load boundary conditions for members (maximum force in member, minimum force in member, horizontal tension component, tension at i-end, tension at j-end, minimum tension at i-end, minimum tension at j-end)
- Material type "Fabric" and "Foil" in material library
- Parallel form-findings in one model
- Simulation of sequentially building form-finding states in connection with the Construction Stages Analysis (CSA) Add-On
- Why do the results in a modal analysis differ between the initial prestress and the surface load?
- Although I have modeled two identical structural systems, I obtain a different shape. Why?
- How is it possible to make factorized combinations of a dead load in the context of form‑finding?
- My aim is to mesh a circular hole plate in a mapped way. Is such a meshing possible in RFEM?
- It seems that the members stay not deformed after my RF-FORM-FINDING calculation. What did I wrong?
Can I export my cutting pattern?
- How do I model a tent roof with two cone tips?
- How do I model a suspended membrane roof structure with line supports?
- I would like to calculate and design "temporary structures." What do I need for this?
- I have already divided my membrane roof into individual surfaces. Can I quickly create a cutting pattern from these surfaces?
RFEM 6 structural analysis software is the basis of a modular software system. The main RFEM 6 program is used to define structures, materials, and loads of planar and spatial structural systems consisting of plates, walls, shells, and members. The program also allows you to create combined structures as well as to model solid and contact elements.
The Form-Finding add-on finds the optimal shape of members subjected to axial forces and tension-loaded surface models. The shape is determined by the equilibrium between the member axial force or the membrane stress and the existing boundary conditions.
With the Construction Stages Analysis (CSA) add-on, the construction process of structures (member, surface, and solid structures) can be considered in RFEM.
RWIND is a program (digital wind tunnel) for the numerical simulation of wind flows around any building geometries with determination of the wind loads on their surfaces. It can be used as a stand-alone application or used together with RFEM and RSTAB for complete structural analysis and design.
RWIND is a program (digital wind tunnel) for the numerical simulation of wind flows around any building geometries with determination of the wind loads on their surfaces. It can be used as a stand-alone application or together with RFEM and RSTAB for complete structural analysis and design.