Za pomocą modułu dodatkowego RF-TIMBER CSA możliwe jest wymiarowanie słupów drewnianych zgodnie z kanadyjską normą O86-19. Dokładne wyznaczanie wytrzymałości na ściskanie i odpowiednich współczynników korekcyjnych dla prętów drewnianych jest istotne ze względów bezpieczeństwa. The following article will verify the factored compressive resistance in the RFEM add-on module RF-TIMBER CSA, using step-by-step analytical equations as per the CSA O86-19 standard including the column modification factors, factored compressive resistance, and final design ratio.
Za pomocą modułu dodatkowego RF-TIMBER CSA belki drewniane można wymiarować zgodnie z kanadyjską normą O86-14. Dokładne wyznaczanie wytrzymałości na zginanie i odpowiednich współczynników korekcyjnych dla prętów drewnianych jest istotne ze względów bezpieczeństwa. The following article will verify the factored bending moment resistance in the RFEM add-on module RF-TIMBER CSA using step-by-step analytical equations as per the CSA O86-14 standard including the bending modification factors, factored bending moment resistance, and final design ratio.
Requirements for the design of structural stability are given in the AISC 360 – 14th Ed. Chapter C. In particular, the direct analysis method provisions, previously located in Appendix 7 of the AISC 360 – 13th Ed., are described in detail. This method is considered an alternative to the effective length method, which in turn eliminates the need for effective length (K) factors other than 1.0.