- RFEM 6 | Dynamic Analysis and Seismic Design According to EC 8
- BIM World PARIS 2021
- Structural Engineering 2021 - 25th Conference of Structural Engineers
- SAIE 2020 | The construction fair
- Modeling CLT Building
- RFEM | Timber Design - Basic
- RFEM | Basics
- RFEM | Basics
- RFEM | Basics
- RFEM | Structural Dynamics and Seismic Design
- RFEM | Structural Dynamics and Seismic Design
- RFEM | Structural Dynamics and Seismic Design
- RFEM | Structural Dynamics and Seismic Design According to EC 8
- RFEM | Structural Dynamics and Seismic Design According to EC 8
- RFEM | Timber Basics
- RFEM | Basics
- RFEM | Dynamic analysis and anti-seismic design according to EC 8
- RFEM | Structural dynamics and earthquake design according to EC 8
- RFEM | Structural Dynamics and Seismic Design According to EC 8
- RFEM | Structural Dynamics and Seismic Design According to EC 8
- RFEM | Structural dynamics and earthquake design according to EC 8
- RFEM | Structural Dynamics and Seismic Design According to EC 8
- RFEM | Basics
- RFEM | Basics
- Eurocode 8 | Structural Dynamics and Seismic Design
- RFEM | Dynamics | USA
- RFEM | Structural Dynamics and Seismic Analysis According to EC 8
- Online Introductory Training RFEM - KTH Royal Institute of Technology
- RFEM | Dynamic Analysis and Seismic Design According to EC 8
- RFEM | Structural Dynamics and Seismic Analysis According to EC 8
- RFEM 5 | Basics
- RFEM | Structural Dynamics and Seismic Design According to EC 8
- RFEM 5 | Structural Dynamics and Seismic Design According to EC 8
- RFEM 6 | Basics
- RFEM 6 | Structural Dynamics and Seismic Design According to EC 8
- RFEM 6 | Dynamic Analysis and Seismic Design According to EC 8
- RFEM 6 | Basics
- RFEM 6 | Basics
- RFEM 6 | Structural Dynamics and Seismic Design According to EC 8
- RFEM 6 | Dynamic Analysis and Seismic Design According to EC 8
- RFEM 6 | Basics
- RFEM 6 | Structural Dynamics and Seismic Design According to EC 8
- RFEM 6 | Dynamic Analysis and Seismic Design According to EC 8
- RSECTION | Students | Introduction to Strength of Materials
- RFEM | Basics | HTW Saar
- RFEM 6 | Basics
- RFEM 6 | Basics
- RFEM 6 | Structural Dynamics and Seismic Design According to EC 8
- RFEM 6 | Dynamic Analysis and Seismic Design According to EC 8
- RFEM 6 | Dynamic Analysis and Seismic Design According to EC 8
- RFEM 6 | Basics | Deggendorf Institute of Technology
- RSECTION | Students | Introduction to Strength of Materials
- Structural Engineering 2022 - 26th Conference of Structural Engineers
- RFEM 6 | Dynamic Analysis and Seismic Design According to EC 8
- RSECTION | For Students | Introduction to Strength of Materials
- RSECTION | For Students | Introduction to Strength of Materials
- RFEM 6 | Dynamic Analysis and Seismic Design According to EC 8
- RFEM 6 for Students | Introduction to Strength of Materials | Apr 26, 2023
Cross-Laminated Timber (CLT) Building
You can download this structural model to use it for training purposes or for your projects. However, we do not assume any guarantee or liability for the accuracy or completeness of the model.
In the RF-LAMINATE add-on module for RFEM, the design of torsional shear stresses in the superposition of net and gross cross-section values is possible. The design is performed separately in the x- and y-directions. The loads on the intersection points of cross-laminated timber panels are checked.
It is necessary to select load cases, load combinations, and result combinations for the ultimate and the serviceability limit state design. After selecting the surfaces to be designed, you can define the relevant material model.
The structure of layers forming the basis for the stiffness calculation can vary. You can adjust the parameters defined by the selected material model according to your individual needs. The 3*3 matrix of the layers is modifiable as well. In this way completely free selection when generating the stiffnesses is provided.
The limit stresses of each layer are defined by the selected material. These values can be customized as well.
After the calculation, the maximum stresses, stress ratios, and displacements are displayed by load case, surface, or grid points. The design ratio can be related to any kind of stress type. The current location is highlighted by color in the RFEM model.
In addition to the result evaluation in tables, it is possible to display the stresses and stress ratios graphically in the RFEM work window. For this, you can adjust the colors and values assigned in the panel.
- General stress analysis
- Graphical and numerical results of stresses and stress ratios fully integrated in RFEM
- Flexible design with different layer compositions
- High efficiency due to few entries required
- Flexibility due to detailed setting options for basis and extent of calculations
- A local overall stiffness matrix of the surface in RFEM is generated on the basis of the selected material model and the layers contained. The following material models are available:
- Orthotropic
- Isotropic
- User-defined
- Hybrid (for combinations of material models)
- Option to save frequently used layer structures in a database
- Determination of basic, shear, and equivalent stresses
- In addition to the basic stresses, the required stresses according to DIN EN 1995-1-1 and the interaction of those stresses are available as results.
- Stress analysis for structural surfaces including simple or complex shapes
- Equivalent stresses calculated according to different approaches:
- Shape modification hypothesis (von Mises)
- Shear stress hypothesis (Tresca)
- Normal stress hypothesis (Rankine)
- Principal strain hypothesis (Bach)
- Calculation of transversal shear stresses according to Mindlin or Kirchhoff, or user-defined specifications
- Serviceability limit state design by checking surface displacements
- User-defined specifications of limit deflections
- Possibility to consider layer coupling
- Detailed results of individual stress components and ratios in tables and graphics
- Results of stresses for each layer in the model
- Parts list of designed surfaces
- Possible coupling of layers entirely without shear