This structural analysis model available for download may be used for learning or testing purposes. There is no guarantee or liability for the accuracy or completeness of the model.
2-Span Hall Module
Model to Download
Description
Parameterization of geometry of 2 bay steel hall module. Cross-bracing on the side panels. Side columns with variable cross-section.
Model created by the Dlubal Latam engineering team. The model is also available as a parameterized block on the Dlubal Latam website.
Keywords
Steel Hall Industrial Module Bay Triangular Column Bracing Reinforcement
Write Comment...
Write Comment...
- Views 230x
- Downloads 20x
- Updated 09/21/2023
- Block parameters editable dynamically
- Number of Nodes 96
- Number of Lines 66
- Number of Members 66
- Number of Load Cases 5
- Number of Load Combinations 19
- Number of Result Combinations 3
- Total Weight 7.855 tons
- Dimensions 125.72 x 20.73 x 27.21 feet
- Program Version 5.21.02
Disclaimer
This technical article deals with the design of structural components and cross-sections of a welded truss girder in the ultimate limit state. Furthermore, the deformation analysis in the serviceability limit state is described.
- How is it possible to consider the real cross-section geometry of member elements in RWIND Simulation?
- When I apply an area load to a surface with an opening, the load is not not accounted for at the opening. Is it possible to automatically consider the area load as a line load around the opening perimeter?
- Is it also possible to determine the stiffnesses of an existing column instead of a fixed nodal support?
- I just have to calculate an open hall with low roof loads and, compared to them, relatively high wind loads. In theory, it is necessary to perform the lateral-torsional buckling design of the bottom flange. Unfortunately, the combination 1.0*G + 1.5*W is missing.
- How do I obtain the maximum column load in my RFEM 3D model?
