Belka ćwierćokrągła o przekroju prostokątnym jest obciążona siłą unoszącą się z płaszczyzny. This force causes a bending moment, torsional moment, and transverse force. While neglecting self-weight, determine the total deflection of the curved beam.
A sphere is subjected to a uniform flow of viscous fluid. The velocity of the fluid is considered at infinity. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
Słup składa się z przekroju betonowego (prostokąt 100/200) oraz stalowego (profil I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Belka podparta przegubowo na obu końcach jest obciążona w środku siłą skupioną. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Prosty oscylator składa się z masy m (rozpatrywanej tylko w kierunku x) i liniowej sprężystości sztywności k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
Celem tego przykładu weryfikacyjnego jest analiza przepływu płynu wokół szybowca. Zadanie polega na wyznaczeniu współczynnika oporu powietrza i współczynnika siły nośnej w odniesieniu do kąta natarcia. Współczynniki te można również narysować na wykresie biegunowej oporu. Graniczny kąt dla laminarnego przepływu cieczy wokół profilu skrzydła można również określić na podstawie pola prędkości. Dostępny model 3D CAD (plik STL) jest wykorzystywany w RWIND 2.
W przykładzie obliczeniowym porównano obliczenia obciążenia wiatrem budynku z płaskim dachem zgodnie z normą EN 1991-1-4 z wykorzystaniem symulacji CFD w RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
W przykładzie obliczeniowym porównano obliczenia obciążenia wiatrem budynku z dachem dwuspadowym, przeprowadzone zgodnie z normą EN 1991-1-4, z wykorzystaniem symulacji CFD w RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Japoński Instytut Architektury (AIJ) przedstawił kilka dobrze znanych scenariuszy porównawczych symulacji wiatru. Poniższy artykuł dotyczy "Przypadku E - zespół budynków w rzeczywistym obszarze miejskim o gęstej koncentracji niskiej zabudowy w mieście Niigata". Poniżej opisany scenariusz jest symulowany w RWIND2, a wyniki są porównywane z symulowanymi i doświadczalnymi wynikami AIJ.
Ten przykład weryfikacyjny porównuje obliczenia obciążenia wiatrem budynku z dachem dwuspadowym, z wykorzystaniem normy ASCE 7-16, z symulacją CFD w RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Konstrukcja kratownicowa składa się z trzech prętów (jeden stalowych i dwa miedziane) połączonych sztywnym prętem. The structure is loaded by a concentrated force and a temperature difference. While neglecting self‑weight, determine the total deflection of the structure.
Japoński Instytut Architektury (AIJ) przedstawił kilka dobrze znanych scenariuszy porównawczych symulacji wiatru. Poniższy artykuł dotyczy "Przypadku D - Wieżowiec wśród bloków miejskich". Poniżej opisany scenariusz jest symulowany w RWIND2, a wyniki są porównywane z symulowanymi i doświadczalnymi wynikami AIJ.
Ten przykład weryfikacyjny porównuje obliczenia obciążenia wiatrem budynku z dachem płaskim, przeprowadzone w normie ASCE 7-16, z wykorzystaniem symulacji CFD w RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Stalowy pręt między dwiema sztywnymi podporami ze szczeliną jest obciążony różnicą temperatur. While neglecting self‑weight, determine the total deformation of the rod and its internal axial force.
Przykład ten służy do zademonstrowania ograniczenia membrany. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Belka jest w pełni utwierdzona (skręcanie jest ograniczone) na lewym końcu i podparta na podporze widełkowej (skręcanie jest aktywne) na prawym końcu. The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
Analiza czasowa belki wspornikowej (układ SDOF) wzbudzanej przez funkcję okresową. Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.
Konstrukcja z profilu I jest w pełni utwierdzona na lewym końcu i osadzona w podporze przesuwnej na prawym końcu. The structure consists of two segments. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Konstrukcja składa się z dwóch kratownic wbudowanych w podpory przegubowe. The structure is loaded by concentrated force. The self-weight is neglected. Determine the relationship between the loading force and the deflection, considering large deformations.