Konstrukcja składa się z belki o przekroju dwuteowym i dwóch kratownic rurowych. The structure contains several imperfections and it is loaded by the force Fz. Ciężar własny jest pomijany w tym przykładzie. Determine the deflections uy and uz and axial rotation φx at the endpoint (Point 4). Przykład obliczeniowy oparty jest na przykładzie wprowadzonym przez Gensichen i Lumpe.
Belka ciągła z czterema przęsłami jest obciążona siłami osiowymi i zginającymi (zastępuje imperfekcje). Wszystkie podpory są widełkowe - deplanacja jest dowolna. Określ przemieszczenia uy i uz, momenty My, Mz, Mω i MTpri oraz obrót φx. Przykład obliczeniowy oparty jest na przykładzie wprowadzonym przez Gensichen i Lumpe.
Belka żelbetowa została zaprojektowana jako belka dwuprzęsłowa na wsporniku. Przekrój zmienia się na całej długości wspornika (przekrój o zmiennym przekroju). Obliczane są siły wewnętrzne oraz wymagane zbrojenie podłużne i zbrojenie na ścinanie dla stanu granicznego nośności.
W bieżącym przykładzie walidacyjnym badamy współczynnik parcia wiatru (Cp) płaskiego dachu i ścian za pomocą ASCE7-22 [1]. W rozdziale 28.3 (Obciążenia wiatrem - główny układ odporności na siłę wiatru) i na Rysunku 28.3-1 (przypadek obciążenia 1) znajduje się tabela przedstawiająca wartość Cp dla różnych kątów nachylenia dachu.
Konstrukcja z profilu I jest osadzona w podporach widłowych. The axial rotation is restricted on both ends while warping is enabled. The structure is loaded by two transverse forces in the middle. The verification example is based on the example introduced by Gensichen and Lumpe.
Przykład obliczeniowy opisuje obciążenia wiatrem działające na model grupy budynków w kilku kierunkach. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
Przykład obliczeniowy opisuje obciążenia od ściskania ścian budynków w układzie tandem, zlokalizowanych w poziomie terenu. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Przykład obliczeniowy opisuje stacjonarny przepływ wokół wieżowca w postaci bloków miejskich (model w skali). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
Przykład obliczeniowy opisuje stacjonarny przepływ wokół izolowanego budynku (model w skali). The chosen results (velocity magnitude) are compared with the measured values.