Japonský architektonický institut (AIJ) v souladu se srovnávacími testy pro Windsimulation vorgestellt. Podle nového návrhu "Případ A - výšková budova ve tvaru 2:1:1". Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet and die Ergebnisse se simulierten and der experimentellen Resultate des AIJ verglichen.
Konstrukce se skládá ze dvou nosníků různé délky, které jsou uloženy na kloubových podporách. The structure is loaded by concentrated force. The self-weight is neglected. Determine the relationship between the loading force and the deflection, considering large deformations.
A spherical balloon membrane is filled with gas with atmospheric pressure and defined volume (these values are used for FE model definition only). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. K tomu slouží přídavný modul RF-FORM-FINDING. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Pro MSÚ při normální teplotě je navržen železobetonový sloup podle DIN EN 1992-1-1/NA/A1:2015, na základě 1990-1-1/NA/A1:2012-08. Při posouzení se použije metoda jmenovitého zakřivení; viz DIN EN 1992-1-1, odstavec 5.8.8. Řešený sloup je umístěn na okraji rámové konstrukce o 3 polích, která se skládá ze 4 konzolových sloupů a 3 samostatných vazníků, které jsou na nich kloubově spojeny. Na sloup působí svislá síla prefabrikovaného vazníku, sníh a vítr. Výsledky jsou porovnány s literaturou.
A bimetallic strip is composed of invar and copper. The left end of the bimetallic strip is fixed, and the right end is free, loaded by temperature difference. Průhyb bimetalového pásu (na volném konci) se stanoví bez zohlednění vlastní tíhy.
A pipe with a tubular cross-section is loaded by internal pressure. This internal pressure causes axial deformation of the pipe (the Bourdon effect). Stanovte axiální deformaci koncového bodu trubky.
Cílem tohoto verifikačního příkladu je analyzovat proudění okolo kluzáku. Úkolem je stanovit součinitele odporu vzduchu a součinitele vztlaku vzhledem k úhlu náběhu. Pro tyto součinitele lze také vykreslit aerodynamickou poláru. Z pole rychlostí lze také určit mezní úhel laminárního proudění okolo profilu křídla. V programu RWIND 2 se použije dostupný 3D CAD model (soubor STL).
Cílem tohoto příkladu je předvést nevratný děj způsobený třením. After the loading and unloading, the end-point is in a different position than where it was at the beginning. Determine the movement of the node in the X direction.
Ein Kehlbalken Dach mit gewählter Geometrie wird in Hinblick auf seine Schnittgrößen zwischen Berechnung mittels RFEM 6 und der Handrechnung verglichen. Pokud se týká návrhu 3 Poslední systém pod kontrolou.
A double-mass oscillator consists of two linear springs and masses, which are concentrated at the nodes. Vlastní tíha pružin je zanedbána. Determine the natural frequencies of the system.
Stanoví se maximální posun, napětí v rovině a poměr napětí u jednoduše podepřené dvojité skleněné desky s fólií mezi oběma skleněnými tabulemi vystavené rovnoměrnému tlaku.
Stanovíme maximální deformaci stěny rozdělené na dvě stejné části. Horní a dolní část jsou vyrobeny z elastoplastického a elastického materiálu a obě koncové roviny jsou omezeny na pohyb ve svislém směru. Vlastní tíha stěny se zanedbá; jeho okraje jsou zatíženy vodorovným tlakem ph a středová rovina svislým tlakem.
Dvouvrstvá silnostěnná nádoba s otevřeným koncem je zatížena vnitřním a vnějším tlakem; proto nevzniká žádné osové napětí. While neglecting self‑weight, the radial deflection of the inner and outer radius, and the pressure (radial stress) in the middle radius is determined.
Konzola z kruhového prutu je zatížena excentrickou normálovou silou. Determine the maximum vertical deflection of the console using the geometrically linear and second-order analysis.
Konzola z kruhového prutu je zatížena excentrickou příčnou silou. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Konzola z kruhového prutu je zatížena excentrickým rovnoměrným zatížením. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Prut s mírným sklonem je namáhán osamělou silou, na jednom konci je držen pružinou a na druhém konci podepřen. Assuming large deformations and neglecting the member's self-weight, determine its maximum upward deflection.
A membrane is stretched by means of isotropic prestress between two radii of two concentric cylinders not lying in a plane parallel to the vertical axis. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. K tomu slouží přídavný modul RF-FORM-FINDING. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.