Setting Number of Member Divisions for Result Diagrams
Tips & Tricks
In the calculation settings, you can define the number of member divisions for result diagrams. The picture illustrates the purpose of this setting option.
For a line load, the moment diagram of the short member is triangular. The reason for this is the member above, which is comparatively much longer. If, like in this example, the number of divisions is set to 10, the longest member in the system is divided into 10 portions. This division length also applies for all other members. Because the shorter member is two meters long and a division length equals one meter, the moment distribution can only yield a triangle.
To fix this, you can either divide the longest member or increase the value for the member divisions in the calculation settings.
Do you have any questions or need advice?
Contact us via e-mail, chat or forum. Find also various suggested solutions and useful tips on our FAQ page.
Structural engineering software for finite element analysis (FEA) of planar and spatial structural systems consisting of plates, walls, shells, members (beams), solids and contact elements
The structural engineering software for design of frame, beam and truss structures, performing linear and nonlinear calculations of internal forces, deformations, and support reactions