Japonský architektonický institut (AIJ) v souladu se srovnávacími testy pro Windsimulation vorgestellt. Podle nového návrhu "Případ A - výšková budova ve tvaru 2:1:1". Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet and die Ergebnisse se simulierten and der experimentellen Resultate des AIJ verglichen.
Konstrukce se skládá ze dvou nosníků různé délky, které jsou uloženy na kloubových podporách. The structure is loaded by concentrated force. The self-weight is neglected. Determine the relationship between the loading force and the deflection, considering large deformations.
A spherical balloon membrane is filled with gas with atmospheric pressure and defined volume (these values are used for FE model definition only). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. K tomu slouží přídavný modul RF-FORM-FINDING. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Pro MSÚ při normální teplotě je navržen železobetonový sloup podle DIN EN 1992-1-1/NA/A1:2015, na základě 1990-1-1/NA/A1:2012-08. Při posouzení se použije metoda jmenovitého zakřivení; viz DIN EN 1992-1-1, odstavec 5.8.8. Řešený sloup je umístěn na okraji rámové konstrukce o 3 polích, která se skládá ze 4 konzolových sloupů a 3 samostatných vazníků, které jsou na nich kloubově spojeny. Na sloup působí svislá síla prefabrikovaného vazníku, sníh a vítr. Výsledky jsou porovnány s literaturou.
A bimetallic strip is composed of invar and copper. The left end of the bimetallic strip is fixed, and the right end is free, loaded by temperature difference. Průhyb bimetalového pásu (na volném konci) se stanoví bez zohlednění vlastní tíhy.
A pipe with a tubular cross-section is loaded by internal pressure. This internal pressure causes axial deformation of the pipe (the Bourdon effect). Stanovte axiální deformaci koncového bodu trubky.
Cílem tohoto verifikačního příkladu je analyzovat proudění okolo kluzáku. Úkolem je stanovit součinitele odporu vzduchu a součinitele vztlaku vzhledem k úhlu náběhu. Pro tyto součinitele lze také vykreslit aerodynamickou poláru. Z pole rychlostí lze také určit mezní úhel laminárního proudění okolo profilu křídla. V programu RWIND 2 se použije dostupný 3D CAD model (soubor STL).
Cílem tohoto příkladu je předvést nevratný děj způsobený třením. After the loading and unloading, the end-point is in a different position than where it was at the beginning. Determine the movement of the node in the X direction.
Ein Kehlbalken Dach mit gewählter Geometrie wird in Hinblick auf seine Schnittgrößen zwischen Berechnung mittels RFEM 6 und der Handrechnung verglichen. Pokud se týká návrhu 3 Poslední systém pod kontrolou.
A double-mass oscillator consists of two linear springs and masses, which are concentrated at the nodes. Vlastní tíha pružin je zanedbána. Determine the natural frequencies of the system.
Stanoví se maximální posun, napětí v rovině a poměr napětí u jednoduše podepřené dvojité skleněné desky s fólií mezi oběma skleněnými tabulemi vystavené rovnoměrnému tlaku.
Stanovíme maximální deformaci stěny rozdělené na dvě stejné části. Horní a dolní část jsou vyrobeny z elastoplastického a elastického materiálu a obě koncové roviny jsou omezeny na pohyb ve svislém směru. Vlastní tíha stěny se zanedbá; jeho okraje jsou zatíženy vodorovným tlakem ph a středová rovina svislým tlakem.
Dvouvrstvá silnostěnná nádoba s otevřeným koncem je zatížena vnitřním a vnějším tlakem; proto nevzniká žádné osové napětí. While neglecting self‑weight, the radial deflection of the inner and outer radius, and the pressure (radial stress) in the middle radius is determined.
Konzola z kruhového prutu je zatížena excentrickou normálovou silou. Determine the maximum vertical deflection of the console using the geometrically linear and second-order analysis.
Konzola z kruhového prutu je zatížena excentrickou příčnou silou. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Konzola z kruhového prutu je zatížena excentrickým rovnoměrným zatížením. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Prut s mírným sklonem je namáhán osamělou silou, na jednom konci je držen pružinou a na druhém konci podepřen. Assuming large deformations and neglecting the member's self-weight, determine its maximum upward deflection.
A membrane is stretched by means of isotropic prestress between two radii of two concentric cylinders not lying in a plane parallel to the vertical axis. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. K tomu slouží přídavný modul RF-FORM-FINDING. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
A vertical cantilever with a square cross-section is loaded at the top by tensile pressure. Konzola je z izotropního materiálu. Calculate the deflection.
A structure made of an I-profile is fully fixed on the left end and embedded into the sliding support on the right end. Konstrukce se skládá ze dvou segmentů. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Stanovíme maximální průhyb čtyř dolních sloupů spojených tuhým blokem nahoře. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Na obou koncích je upevněn trojrozměrný blok z elasticko-plastického materiálu. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Na obou koncích je upevněn trojrozměrný blok z elasticko-plastického materiálu s vytvrzením. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Determine the maximum deflection of a three-dimensional block fixed at both ends. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. Na rovinu procházející středem bloku působí svislý tlak.
Ocelové lano nebo membrána s kolíky na obou koncích jsou zatíženy rovnoměrným zatížením. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
A cylindrical membrane is stretched by means of isotropic prestress. Find the final minimal shape of the membrane - catenoid. Stanovíme maximální radiální průhyb membrány. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Nosník uložený na obou koncích je zatížen soustředěnou silou uprostřed. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Tento verifikační příklad vychází z verifikačního příkladu 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.