I would like to calculate a hall frame with loads from a crane runway. It is not quite clear to me what the various action categories denote. Can you explain it to me?
What does the design information mean: Geometry error left side: End plate of the girder: Lambda2 >1.4 Column flange: Lambda2 >1.4 I cannot find an explanation in the manual or online.
Do you have a program for designing columns restrained in concrete? It is not about the design of the bucket, but about the required embedment depth, the provided concrete stress, the check of the shear stress in the column, and so on.
In FOUNDATION Pro, I get extremely large foundations for my structure or I have to enter a very high loading in order to fulfill the design of the foundation torsion. What can be the reason?
I would like to perform the fire resistance design using the EC3 add-on module. Is it possible to intervene in the program in such a way that I can use my own temperature curve instead of the standard one?
For a calculation, I activated the "Detailed Calculation" option. Have the support loads already been specified with the reduced dynamic coefficient for the design of the substructure?
I used double members for the member input. Do I have to consider anything else, or is it better to enter a member with double cross-section properties?
For the fire resistance design, the modulus of elasticity is reduced. I assume that this applies to the design first. However, to what extent is a stiffness change in the structural system and thus a load redistribution considered?
I have to dimension a wall bracket as a steel brackets that I have modeled as surface components in RFEM 5. Which add-on module can I use to design it?
I would like to design banisters, so I have created a set of members for this. The cross-section is a hollow section. Can the stability analysis be carried out on the entire structure, or do I have to convert it into an equivalent member design with the specification of all supports in STEEL EC3?