64x
000428
0001-01-01

Selecting the Contents

The printout report has a navigator which is similar to the one of RFEM. It lists the chapters of the document. When you click an entry, the page of that chapter is displayed.

You can customize the preset chapters and their contents: Click the Editing Printout Report button on the toolbar (second from the right) to open the 'Printout Report Manager' again.

In the 'Report Items' area, scroll down to the 'Static Analysis Results' category. Activate the Surfaces - Basic Internal Forces check box, for example, to include the moments and forces of the surfaces (1). Then select the item to activate the 'Options' area and modify its parameters.

In that 'Options' area to the right, clear the Result filters from current table set option. You can thus apply specific settings for the data to be printed (2). Activate the Select loading option beneath to include the results of specific load cases or combinations only. Then select the Load Cases / Combinations tab (3).

In the 'To Select' column, double-click the DS1 design situation to transfer it to the 'Selected' column. (Alternatively, select it and click the Add button.) Next click the To Display.

Clear all check boxes except for the Extreme max/min values by any surface option. Then click Save and Show again.

The printout report now includes the maximum and minimum values of every surface. Those values refer to the grid points (see the Basic stresses of surfaces image).

Parent section