This article was translated by Google Translator View original text

How to authorize the RWIND Simulation program offline with a software key on a single-station computer via e-mail?

Answer

The program RWIND Simulation is protected against unauthorized use. The program can be authorized offline (computer is not connected to the Internet) by activating an email. To do this, proceed as follows:

  1. Execute RWIND Simulation 'As Administrator'. To do this, right-click the RWIND Simulation icon and select "Run as Administrator".

    Figure 01 - program start

  2. Confirm the authorization check with the 'Activate Now' function.

    Figure 02 - Authorization check

    This opens the "RWIND Simulation 1.xx Demo Authorization Status" dialog box.

  3. In the "RWIND Simulation 1.xx Demo Authorization Status" dialog box, select the "Software Key" option in the Authorization Method area and click the "Activation via E-Mail" function in the lower part.

    Figure 03 - Email Activation

    This opens the "Activation by E-Mail" dialog box.

  4. In the "Activation by E-Mail" dialog box, enter your license information (license number and/or name and address of the institution that purchased the program license) based on your contract documents.

    Furthermore, enter a user-defined description of the workstation to be activated under "Description of workspace" and the RWIND Simulation level with an expiry date of the activation to be carried out under "Required authorization".

    Then confirm your entries by clicking the "Generate Request Code" function.

    Figure 04 - Generate Request Codes

    This opens the "RWIND Simulation 1.xx Demo" dialog box.

  5. Check the entries made in the "RWIND Simulation 1.xx Demo" dialog box. If they are OK, confirm the dialog box with "OK."

    Figure 05 - Checking the entries

    This opens the "Activation by E-Mail" dialog box.

  6. The "Activation via E-Mail" dialog box consists of three parts. In the "Step 2" tab, the required request code is displayed on the left. Copy this text block to the Windows clipboard with the "Copy Request Code" function and then paste the code into a blank e-mail with [Ctrl] + [V] or the Windows paste function. Send this email to support@dlubal.com for further processing.

    Figure 06 - Send request code

  7. You will receive an activation code from us. In the dialog box, go to the "Step 3" tab and enter this code in the "Activation Code" field.

    Then, start the activation process by clicking the "Activate Now" function.

    Figure 07 - Program activation

    After successful authorization, you will receive a confirmation message and it is possible to use the program without any restrictions.
This offline email activation occupies the license you have purchased for the defined activation period in our system. During this period, it is not possible to activate the program RWIND Simulation with the same license on any other computer. The assignment of the license in our system ends with a proper deactivation or after the defined activation period has expired.

Afterwards, the activation process can be carried out again on the same or a different computer. Please note that e-mail request codes can only be used once for activation. To reactivate, a new request code must always be sent to us.

To avoid unnecessary license assignments in our system due to unexpected computer problems on your part (defect, loss, hardware replacement, employee change, etc.), we recommend that you keep the activation period as short as possible.

Keywords

Software key Offline Activation softlock RWIND license authorization Activation

Contact us

Contact to Dlubal

Did you find your question?
If not, contact us via our free e-mail, chat, or forum support, or send us your question via the online form.

+49 9673 9203 0

info@dlubal.com

Compatible Programs RWIND Simulation
RWIND Simulation 1.xx

Stand-Alone Program

Stand-alone program for numerical simulations of wind flow around buildings or any other objects. The generated wind loads acting on these objects can be imported into RFEM / RSTAB programs for static and dynamic analysis.

Price of First License
2,690.00 USD