A wide range of cross-sections, such as rectangular sections, square sections, T‑sections, circular sections, built-up cross-sections, irregular parametric cross-sections, and many others (suitability for design depends on the selected standard)
Design of cross-laminated timber (CLT)
Design of timber-based materials and laminated veneer lumber according to EC 5
Design of tapered and curved members (design method according to the standard)
Adjustment of the essential design factors and standard parameters is possible
Flexibility due to detailed setting options for basis and extent of calculations
Fast and clear results output for an immediate overview of the result distribution after the design
Detailed output of the design results and essential formulas (comprehensible and verifiable result path)
Numerical results clearly arranged in tables and graphical display of the results in the model
Integration of the output into the RFEM/RSTAB printout report
Within a member, you can define the integration width and effective slab width of T-beams (ribs) with different widths. The member is divided into segments. You can either grade or specify the transition between the different flange widths as linearly variable. Furthermore, the program allows you to consider the defined surface reinforcement as a flange reinforcement for the reinforced concrete design of a rib.
Discover the advantages of working with the various add-ons for RFEM 6 and RSTAB 9. All add-ons are integrated in the programs. This allows seamless interaction between the individual program parts and ensure that your analysis and design runs smoothly. Some examples of this are the determination of the ideal overturning moment of timber beams using the "Torsional Warping (7 DOF)" add-on and the consideration of staggered form-finding processes by means of the "Construction Stages Analysis (CSA)" add-on.
Compared to the RF-/STEEL Warping Torsion add-on module (RFEM 5 / RSTAB 8), the following new features have been added to the Torsional Warping (7 DOF) add-on for RFEM 6 / RSTAB 9:
Complete integration into the environment of RFEM 6 and RSTAB 9
7th degree of freedom is directly taken into account in the calculation of members in RFEM/RSTAB on the entire system
No more need to define support conditions or spring stiffnesses for calculation on the simplified equivalent system
Combination with other add-ons is possible, for example for the calculation of critical loads for torsional buckling and lateral-torsional buckling with stability analysis
No restriction to thin-walled steel sections (it is also possible to calculate ideal overturning moments for beams with massive timber sections, for example)
Compared to the RF‑/STAGES add-on module (RFEM 5), the following new features have been added to the Construction Stages Analysis (CSA) add-on for RFEM 6:
Consideration of construction stages at RFEM level
Integration of the construction stage analysis into the combinatorics in RFEM
Additional structural elements, such as line hinges, are supported
Analysis of alternative construction processes in a model
Deformation analyses of reinforced concrete surfaces without or with cracks (state II) by applying the approximation method (for example, deformation analysis according to ACI 318-19, 24.3.2.5 or EN 1992‑1‑1, Cl. 7.4.3 )
Tension stiffening of concrete applied between cracks
Optional consideration of creep and shrinkage
Graphical representation of results integrated in RFEM, such as deformation or sag of a flat slab
Clear numerical result display in the detail dialog box
Complete integration of results in the RFEM printout report
Have you carried out the design successfully? The results of the deformation analysis are now listed in clearly arranged output tables or detailed dialog boxes with info text. The program shows you all intermediate values in a comprehensible manner. Graphical representation of design ratios and deformation in RFEM allows you for a quick overview of critical areas.
Due to the results output of the design checks with all intermediate results, you can follow the calculation to the smallest detail. The complete integration of results in the RFEM printout report ensures that you obtain verifiable structural design.
Import of relevant information and results from RFEM
Integrated, editable material and section library
Sensible and complete presetting of input parameters
Punching design on columns (all section shapes), wall ends, and wall corners
Automatic recognition of the punching node position from an RFEM model
Detection of curves or splines as a boundary of the control perimeter
Automatic consideration of all slab openings defined in the RFEM model
Construction and graphical display of the control perimeter
Optional design with unsmoothed shear stress along the control perimeter that corresponds to the actual shear stress distribution in the FE model
Determination of the load increment factor β via full-plastic shear distribution as constant factors according to EN 1992‑1‑1, Sect. 6.4.3 (3), based on EN 1992‑1‑1, Fig. 6.21N, or by a user‑defined specification
Numerical and graphical display of results (3D, 2D, and in sections)
Punching design of the slab without punching reinforcement
Qualitative determination of the required punching reinforcement
Design and analysis of the longitudinal reinforcement
Complete integration of results in an RFEM printout report
A wide range of available sections, such as rolled I-sections; channel sections; T-sections; angles; rectangular and circular hollow sections; round bars; symmetrical and asymmetrical, parametric I-, T-, and angle sections; built-up cross-sections (suitability for design depends on the selected standard)
Design of general RSECTION cross-sections (depending on the design formats available in the respective standard); for example, equivalent stress design
Design of tapered members (design method depending on the standard)
Adjustment of the essential design factors and standard parameters is possible
Flexibility due to detailed setting options for basis and extent of calculations
Fast and clear results output for an immediate overview of the result distribution after the design
Detailed output of the design results and essential formulas (comprehensible and verifiable result path)
Numerical results clearly arranged in tables and graphical display of the results in the model
Integration of the output into the RFEM/RSTAB printout report
A wide range of available sections, such as rolled I-sections; channel sections; T-sections; angles; rectangular and circular hollow sections; round bars; symmetrical and asymmetrical, parametric I-, T-, and angle sections; built-up cross-sections (suitability for design depends on the selected standard)
Design of general RSECTION cross-sections (depending on the design formats available in the respective standard); for example, equivalent stress design
Design of tapered members (design method depending on the standard)
Adjustment of the essential design factors and standard parameters is possible
Flexibility due to detailed setting options for basis and extent of calculations
Fast and clear results output for an immediate overview of the result distribution after the design
Detailed output of the design results and essential formulas (comprehensible and verifiable result path)
Numerical results clearly arranged in tables and graphical display of the results in the model
Integration of the output into the RFEM/RSTAB printout report
Consideration of 7 local deformation directions (ux, uy, uz, φx, φy, φz, ω) or 8 internal forces (N, Vu, Vv, Mt,pri, Mt,sec, Mu, Mv, Mω) when calculating member elements
Usable in combination with a structural analysis according to linear static, second-order, and large deformation analysis (imperfections can also be taken into account)
In combination with the Stability Analysis add-on, allows you to determine critical load factors and mode shapes of stability problems such as torsional buckling and lateral-torsional buckling
Consideration of end plates and transverse stiffeners as warping springs when calculating I-sections with automatic determination and graphical display of the warping spring stiffness
Graphical display of the cross-section warping of members in the deformation
Calculation with consideration of a damping ratio (or Lehr's damping) is not possible in the direct time step integrations. Instead, the Rayleigh damping coefficients must be specified by the user.
In technical literature, the given damping ratio for specific construction forms is, in many cases, only a rough approximation of the real damping ratios. In RF-/DYNAM Pro - Forced Vibrations, it is possible to use the value of the damping ratio to determine the Rayleigh damping. This may occur at one or two natural angular frequencies defined by the user.
Due to the integration of RF‑/DYNAM Pro in RFEM or RSTAB, you can incorporate numeric and graphic results from RF‑/DYNAM Pro - Nonlinear Time History to the global printout report. Also, all RFEM and RSTAB options are available for a graphical visualization. The results of the time history analysis are displayed in a time history diagram.
The results are displayed as a function of time and the numerical values can be exported to MS Excel. Result combinations can be exported, either as a result of a single time step or the most unfavorable results of all time steps are filtered out.
Calculation in RFEM The nonlinear time history analysis is performed with the implicit Newmark analysis or the explicit analysis. Both are direct time integration methods. The implicit analysis requires small time steps to provide precise results. The explicit analysis determines the required time step automatically to provide the stability to the solution. The explicit analysis is suitable for the analysis of short excitations, such as impulse excitation, or an explosion.
Calculation in RSTAB The nonlinear time history analysis is performed with the explicit analysis. This is a direct time integration method and determines the required time step automatically in order to provide the solution stability.
Import of materials, cross-sections, and internal forces from RFEM/RSTAB
Steel design of thin‑walled cross‑sections according to EN 1993‑1‑1:2005 and EN 1993‑1‑5:2006
Automatic classification of cross-sections according to EN 1993-1-1:2005 + AC:2009, Cl. 5.5.2, and EN 1993-1-5:2006, Cl. 4.4 (cross-section class 4), with optional determination of effective widths according to Annex E for stresses under fy
Integration of parameters for the following National Annexes:
DIN EN 1993-1-1/NA:2015-08 (Germany)
ÖNORM B 1993-1-1:2007-02 (Austria)
NBN EN 1993-1-1/ANB:2010-12 (Belgium)
BDS EN 1993-1-1/NA:2008 (Bulgaria)
DS/EN 1993-1-1 DK NA:2015 (Denmark)
SFS EN 1993-1-1/NA:2005 (Finland)
NF EN 1993-1-1/NA:2007-05 (France)
ELOT EN 1993-1-1 (Greece)
UNI EN 1993-1-1/NA:2008 (Italy)
LST EN 1993-1-1/NA:2009-04 (Lithuania)
UNI EN 1993-1-1/NA:2011-02 (Italy)
MS EN 1993-1-1/NA:2010 (Malaysia)
NEN EN 1993-1-1/NA:2011-12 (Netherlands)
NS EN 1993-1-1/NA:2008-02 (Norway)
PN EN 1993-1-1/NA:2006-06 (Poland)
NP EN 1993-1-1/NA:2010-03 (Portugal)
SR EN 1993-1-1/NB:2008-04 (Romania)
SS EN 1993-1-1/NA:2011-04 (Sweden)
SS EN 1993-1-1/NA:2010 (Singapore)
STN EN 1993-1-1/NA:2007-12 (Slovakia)
SIST EN 1993-1-1/A101:2006-03 (Slovenia)
UNE EN 1993-1-1/NA:2013-02 (Spain)
CSN EN 1993-1-1/NA:2007-05 (Czech Republic)
BS EN 1993-1-1/NA:2008-12 (the United Kingdom)
CYS EN 1993-1-1/NA:2009-03 (Cyprus)
In addition to the National Annexes (NA) listed above, you can also define a specific NA, applying user‑defined limit values and parameters.
Automatic calculation of all required factors for the design value of flexural buckling resistance Nb,Rd
Automatic determination of the ideal elastic critical moment Mcr for each member or set of members on every x-location according to the Eigenvalue Method or by comparing moment diagrams. You only have to define the lateral intermediate supports.
Design of tapered members, unsymmetric sections or sets of members according to the General Method as described in EN 1993-1-1, Cl. 6.3.4
In the case of the General Method according to Cl. 6.3.4, optional application of "European lateral-torsional buckling curve" according to Naumes, Strohmann, Ungermann, Sedlacek (Stahlbau 77 [2008], pp. 748‑761)
Rotational restraints can be taken into account (trapezoidal sheeting and purlins)
Optional consideration of shear panels (for example, trapezoidal sheeting and bracing)
RF-/STEEL Warping Torsion module extension (license required) for stability analysis according to the second-order analysis as stress analysis including consideration of the 7th degree of freedom (warping)
Module extension RF-/STEEL Plasticity (license required) for plastic analysis of cross‑sections according to Partial Internal Forces Method (PIFM) and Simplex Method for general cross‑sections (in connection with the RF‑/STEEL Warping Torsion module extension, it is possible to perform the plastic design according to the second‑order analysis)
Module extension RF-/STEEL Cold-Formed Sections (license required) for ultimate and serviceability limit state designs for cold-formed steel members according to the EN 1993-1-3 and EN 1993-1-5 standards
ULS design: Selection of fundamental or accidental design situations for each load case, load combination, or result combination
SLS design: Selection of characteristic, frequent, or quasi-permanent design situations for each load case, load combination, or result combination
Tension analysis with definable net cross-section areas for member start and end
Weld designs of welded cross-sections
Optional calculation of warp spring for nodal support on sets of members
Graphic of design ratios on cross-section and in RFEM/RSTAB model
Determination of governing internal forces
Filter options for graphical results in RFEM/RSTAB
Representation of design ratios and cross‑section classes in the rendered view
Color scales in result windows
Automatic cross-section optimization
Transfer of optimized cross-sections to RFEM/RSTAB
Parts lists and quantity surveying
Direct data export to MS Excel
Verifiable printout report
Possibility to include the temperature curve in the report
Full integration in RFEM/RSTAB with import of geometry and load case data
Automatic selection of members for design according to specified criteria (e.g. only vertical members)
In connection with the extension EC2 for RFEM/RSTAB, you can perform the design of reinforced concrete compression elements according to the method based on nominal curvature in compliance with EN 1992 -1‑1:2004 (Eurocode 2) and the following National Annexes:
DIN EN 1992-1-1/NA/A1:2015-12 (Germany)
ÖNORM B 1992-1-1:2018-01 (Austria)
Belgium NBN EN 1992-1-1 ANB:2010 for design at normal temperature, and NBN EN 1992-1-2 ANB:2010 for fire resistance design (Belgium)
BDS EN 1992-1-1:2005/NA:2011 (Bulgaria)
EN 1992-1-1 DK NA:2013 (Denmark)
NF EN 1992-1-1/NA:2016-03 (France)
SFS EN 1992-1-1/NA:2007-10 (Finland)
UNI EN 1992-1-1/NA:2007-07 (Italy)
LVS EN 1992-1-1:2005/NA:2014 (Latvia)
LST EN 1992-1-1:2005/NA:2011 (Lithuania)
MS EN 1992-1-1:2010 (Malaysia)
NEN-EN 1992-1-1+C2:2011/NB:2016 (Netherlands)
NS EN 1992-1 -1:2004-NA:2008 (Norway)
PN EN 1992-1-1/NA:2010 (Poland)
NP EN 1992-1-1/NA:2010-02 (Portugal)
SR EN 1992-1-1:2004/NA:2008 (Romania)
SS EN 1992-1-1/NA:2008 (Sweden)
SS EN 1992-1-1/NA:2008-06 (Singapore)
STN EN 1992-1-1/NA:2008-06 (Slovakia)
SIST EN 1992-1-1:2005/A101:2006 (Slovenia)
UNE EN 1992-1-1/NA:2013 (Spain)
CSN EN 1992-1-1/NA:2016-05 (Czech Republic)
BS EN 1992-1-1:2004/NA:2005 (United Kingdom)
TKP EN 1992-1-1:2009 (Belarus)
CYS EN 1992-1-1:2004/NA:2009 (Cyprus)
In addition to the National Annexes (NA) listed above, you can define a specific NA, applying user-defined limit values and parameters.
Optional consideration of creep
Diagram-based determination of buckling lengths and slenderness from the restraint ratios of columns
Automatic determination of ordinary and unintentional eccentricity from additionally available eccentricity according to the second-order analysis
Design of monolithic structures and precast elements
Analysis with regard to the standard reinforced concrete design
Determination of internal forces according to the linear static analysis and the second-order analysis
Analysis of governing design locations along the column due to existing loading
Output of required longitudinal and stirrup reinforcement
Fire resistance design according to the simplified method (zone method) according to EN 1992-1-2 allowing the fire resistance design of brackets.
Fire resistance design with optional longitudinal reinforcement design according to DIN 4102-22:2004 or DIN 4102-4:2004, Table 31
Longitudinal and link reinforcement proposal with graphic display in 3D rendering
Summary of design ratios, including all design details
Graphical representation of relevant design details in RFEM/RSTAB work window
Design of members and sets of members for tension, compression, bending, shear, combined internal forces, and torsion
Stability analysis of buckling and lateral-torsional buckling
Automatic determination of critical buckling loads and critical buckling moments for general load applications and support conditions by means of a special FEA program (eigenvalue analysis) integrated in the module
Alternative analytical calculation of the critical buckling moment for standard situations
Optional application of discrete lateral supports to beams and continuous members
Automatic cross-section classification (compact, noncompact, and slender)
Serviceability limit state design (deflection)
Cross-section optimization
A wide range of available cross-sections, such as rolled I-sections; channel sections; T-sections; angles; rectangular and circular hollow sections; round bars; symmetrical and asymmetrical, parametric I-, T-, and angle sections; double angles
Clearly arranged input and result windows
Detailed result documentation including references to design equations of the used standard
Various filter and sorting options of results, including result lists by member, cross-sections, and x-location, or by load case, load combination, and result combination
Result table of member slenderness and governing internal forces
Full integration in the RF-/STEEL EC3 add‑on module
Design of cross-sections for tension, compression, bending, torsion, shear, and combined internal forces
Plastic design of members according to the second‑order analysis with 7 degrees of freedom, including warping torsion (requires module extension RF‑/STEEL Warping Torsion).
Import of relevant information and results from RFEM
Integrated, editable material and section library
The module extension EC2 for RFEM enables the design of reinforced concrete members according to EN 1992‑1‑1:2004 (Eurocode 2) and the following National Annexes:
DIN EN 1992-1-1/NA/A1:2015-12 (Germany)
ÖNORM B 1992-1-1:2018-01 (Austria)
NBN EN 1992-1-1 ANB:2010 (Belgium)
BDS EN 1992-1-1:2005/NA:2011 (Bulgaria)
EN 1992-1-1 DK NA:2013 (Denmark)
NF EN 1992-1-1/NA:2016-03 (France)
SFS EN 1992-1-1/NA:2007-10 (Finland)
UNI EN 1992-1-1/NA:2007-07 (Italy)
LVS EN 1992-1-1:2005/NA:2014 (Latvia)
LST EN 1992-1-1:2005/NA:2011 (Lithuania)
MS EN 1992-1-1:2010 (Malaysia)
NEN-EN 1992-1-1+C2:2011/NB:2016 (Netherlands)
NS EN 1992-1 -1:2004-NA:2008 (Norway)
PN EN 1992-1-1/NA:2010 (Poland)
NP EN 1992-1-1/NA:2010-02 (Portugal)
SR EN 1992-1-1:2004/NA:2008 (Romania)
SS EN 1992-1-1/NA:2008 (Sweden)
SS EN 1992-1-1/NA:2008-06 (Singapore)
STN EN 1992-1-1/NA:2008-06 (Slovakia)
SIST EN 1992-1-1:2005/A101:2006 (Slovenia)
UNE EN 1992-1-1/NA:2013 (Spain)
CSN EN 1992-1-1/NA:2016-05 (Czech Republic)
BS EN 1992-1-1:2004/NA:2005 (United Kingdom)
TKP EN 1992-1-1:2009 (Belarus)
CYS EN 1992-1-1:2004/NA:2009 (Cyprus)
In addition to the National Annexes (NA) listed above, you can define a specific NA, applying user‑defined limit values and parameters.
Sensible and complete presetting of input parameters
Punching design on columns, wall ends, and wall corners
Optional arrangement of an enlarged column head
Automatic recognition of the position of the punching node from the RFEM model
Detection of curves or splines as boundary of the control perimeter
Automatic consideration of all slab openings defined in the RFEM model
Structure and graphical display of the control perimeter before calculation starts
Qualitative determination of punching shear reinforcement
Optional design with unsmoothed shear stress along the control perimeter that corresponds to the actual shear stress distribution in the FE model
Determination of the load increment factor β via full-plastic shear distribution as constant factors according to EN 1992‑1‑1, Sect. 6.4.3 (3), based on EN 1992‑1‑1, Fig. 6.21N or by user‑defined specification
Integration of design software by Halfen, a producer of shear rails
Numerical and graphical display of results (3D, 2D, and in sections)
Punching shear design with or without punching shear reinforcement
Optional consideration of minimum moments according to EN 1992‑1‑1 when determining longitudinal reinforcement
Design or analysis of longitudinal reinforcement
Complete integration of results in the RFEM printout report
Design of tension, compression, bending, shear, and combined internal forces
Stability analysis for flexural buckling and lateral-torsional buckling
Automatic determination of critical buckling loads and critical buckling moments for general load applications and support conditions by means of a special FEA program (eigenvalue analysis) integrated in the module
Optional application of discrete lateral supports to beams
Automatic cross-section classification
Deformation analysis (serviceability)
Cross-section optimization
Wide range of cross-sections available, such as rolled I-sections, C-sections, rectangular hollow sections, angles, double angles (arrangement flange on flange), T-sections. Welded sections: I-shaped (symmetrical and asymmetrical about major axis), channel sections (symmetrical about major axis), rectangular hollow sections (symmetrical and asymmetrical about major axis), angles, round pipes, and round bars
Clearly arranged result tables
Detailed result documentation including references to design equations of the used standard
Various filter and sorting options of results, including result lists by member, cross-sections, x-location, or by load case, load and result combination
Result table of member slenderness and governing internal forces
Design of tension, compression, bending, shear, and combined internal forces
Stability analysis for flexural buckling and lateral-torsional buckling
Automatic determination of critical buckling loads and critical buckling moments for general load applications and support conditions by means of a special FEA program (eigenvalue analysis) integrated in the module
Optional application of discrete lateral supports to beams
Automatic cross-section classification
Deformation analysis (serviceability)
Cross-section optimization
Wide range of cross-sections available, such as rolled I-sections, C-sections, rectangular hollow sections, angles, double angles (arrangement flange on flange), T-sections. Welded sections: I-shaped (symmetrical and asymmetrical about major axis), channel sections (symmetrical about major axis), rectangular hollow sections (symmetrical and asymmetrical about major axis), angles, round pipes, and round bars
Clearly arranged result tables
Detailed result documentation including references to design equations of the used standard
Various filter and sorting options of results, including result lists by member, cross-sections, x-location, or by load case, load and result combination
Result table of member slenderness and governing internal forces
Design of tension, compression, bending, shear, and combined internal forces
Stability analysis for flexural buckling and lateral-torsional buckling
Automatic determination of critical buckling loads and critical buckling moments for general load applications and support conditions by means of a special FEA program (eigenvalue analysis) integrated in the module
Optional application of discrete lateral supports to beams
Automatic cross-section classification (Class 1 to 3)
Deformation analysis (serviceability)
Cross-section optimization
Wide range of cross-sections available, such as rolled I-sections, C-sections, rectangular hollow sections, angles, double angles (arrangement flange on flange), T-sections. Welded sections: I-shaped (symmetrical and asymmetrical about major axis), channel sections (symmetrical about major axis), rectangular hollow sections (symmetrical and asymmetrical about major axis), angles, round pipes, and round bars
Clearly arranged result tables
Detailed result documentation including references to design equations of the used standard
Various filter and sorting options of results, including result lists by member, cross-sections, x-location, or by load case, load and result combination
Result table of member slenderness and governing internal forces
Design of members and sets of members for tension, compression, bending, shear, combined internal forces, and torsion
Stability analysis of buckling and lateral-torsional buckling
Automatic determination of critical buckling loads and critical buckling moments for general load applications and support conditions by means of a special FEA program (eigenvalue analysis) integrated in the module
Alternative analytical calculation of the critical buckling moment for standard situations
Optional application of discrete lateral supports to beams and continuous members
Automatic cross-section classification (compact, noncompact, and slender)
Serviceability limit state design (deflection)
Cross-section optimization
A wide range of available cross-sections, such as rolled I-sections, channel sections, T-sections, angles, rectangular and circular hollow sections, round bars, symmetrical, asymmetrical, parameterized I-, T-, and angle sections, as well as user-defined SHAPE‑THIN sections
Clearly arranged input and result windows
Detailed result documentation including references to design equations of the used standard
Various filter and sorting options of results including result lists by member, cross-section, x-location, or by load cases, load and result combinations
Result table of member slenderness and governing internal forces