1034x

002280

2024-03-01

Member and Surface Structures Made of Timber | Part 1: Modeling, Load Input, Combinatorics

In this 65-minute webinar, we will show you how to use the structural analysis software RFEM to model beam and plate structures made of timber, enter the loads, and combine the loads.

Timber Structures | Part 1: Modeling, Load Input, Combinatorics

Occurred

2021-04-20

14:00 - 15:00 CEST

Free

Time Schedule
0:00 Introduction
3:25 Modeling of member and surface elements in RFEM
41:45 Manual load input and use of load generators
1:06:40 Automatic generation of load combinations and result combinations

Below, under Models to Download , you can find the model presented in the webinar. This way, you will be able to independently follow the webinar step by step on the presentation model.

In a second part, we show you how to design beam and surface structures.

Dipl.-Ing. (FH) Andreas Hörold

Marketing & Public Relations

Mr. Hörold takes care of the Dlubal Software website, creates press releases and marketing materials, and moderates the German and English webinars.

Dipl.-Ing. (FH) Stefan Frenzel

Product Engineering & Customer Support

Mr. Frenzel is responsible for developing products for dynamic analysis. He also provides technical support for customers of Dlubal Software.

Location

Online

Do you have any questions?

Events

2024-05-08

Online Training

RFEM 6 | Students | Introduction to Reinforced Concrete Design

2024-05-08

$Cross-Section Modeling and \n Stress Analysis in RSECTION 1$

Webinar

Cross-Section Modeling and Stress Analysis in RSECTION 1

2024-05-15

Online Training

RFEM 6 | Students | Introduction to Steel Design

2024-05-16

Consideration of Construction Stages in RFEM 6

Webinar

Consideration of Construction Stages in RFEM 6

2024-05-23

Most Frequently Asked Questions Answered by Dlubal Support Team

Webinar

Most Frequently Asked Questions Answered by Dlubal Support Team | May 2024

2024-05-29

$Steel Structures in RFEM 6 \n Part 1: Modeling, Load Input$

Webinar

Modeling and Design of Steel Structures in RFEM 6 | Part 1: Modeling, Load Input

2024-06-06

$Steel Structures in RFEM 6 \n Part 2: Combinations, Design, Documentation$

Webinar

Modeling and Design of Steel Structures in RFEM 6 | Part 2: Combinations, Design, Documentation

2024-06-20

Webinar

Most Frequently Asked Questions Answered by Dlubal Support Team | June 2024

2024-10-16

Online Training

RFEM 6 | Students | Introduction to Member Design

2024-10-23

Online Training

RSECTION 1 | Students | Introduction to Strength of Materials

2024-10-30

Online Training

RFEM 6 | Students | Introduction to FEM

2024-11-05 - 2024-11-07

Conference

NCSEA Structural Engineering Summit

Videos

General

Structural Analysis and Design of Timber Structures | Dlubal Software

Length: 00:03:10 min

General

Trailer: Structural Timber with Dlubal Software

Length: 00:00:00 min

RFEM 6 for Students | Introduction to Timber Design

Event

RFEM 6 for Students | Introduction to Timber Design | April 30, 2024

Length: 00:00:00 min

FAQ 005511 | What does each option do under the "Calculation of Torsion" section under the Strength…

FAQ

FAQ 005511 | What does each option do under the "Calculation of Torsion" section under the Strength…

Length: 00:00:16 min

FAQ

FAQ 005494 | How can I model a timber beam with stiffening on both sides? (splice)

Length: 00:01:22 min

Product Feature

Fire Resistance Design of Surfaces for EN 1995, SIA 265, NDS, and CSA O86

Length: 00:00:56 min

Event

Webinar | Timber Floor Calculations in RFEM 6

Length: 00:55:27 min

Event

RFEM 6 for Students | Introduction to Timber Design | November 29, 2023

Length: 01:10:03 min

Product Feature

Cross‑Section Optimization

Length: 00:00:56 min

Playlist

Models to Download

1769x

225x

Timber Hall

453x

96x

Timber Frame Building

Model 004809 | Cross-Laminated Timber Building

389x

57x

Cross-Laminated Timber Building

219x

26x

Timber Slab

Model 004717 | Ceiling with Line Releases

271x

29x

Ceiling with Line Releases

Model 004707 | Office Building of Municipal Works in Kirchheim unter Teck, Germany

284x

Office Building Timber Structure with Reinforced Concrete Elements

497x

Timber Industrial Hall Siegrist Igor Carpenteria

474x

51x

Trussed Roof

494x

59x

Timber-Concrete Building

Knowledge Base Articles

KB 001848 | Timber Column Design as per the 2018 NDS Standard in RFEM 6

Using the Timber Design add-on, timber column design is possible according to the 2018 NDS standard ASD method. Accurately calculating timber member compressive capacity and adjustment factors is important for safety considerations and design. The following article will verify the maximum critical buckling strength calculated by the Timber Design add-on using step-by-step analytical equations as per the NDS 2018 standard including the compressive adjustment factors, adjusted compressive design value, and final design ratio.

KB 001825 | WebService & API for Analysis of Construction Stages

When calculating regular structures, data input is often not complicated but time-consuming. Input automation can save valuable time. The task described in the present article is to consider the stories of a house as single construction stages. Data is entered using a C# program so that the user does not have to enter the elements of the individual floors manually.

Our webservice offers users the opportunity to communicate with RFEM 6 and RSTAB 9 using various programming languages. Dlubal's high-level functions (HLFs) allow you to expand and simplify the WebService's functionality. In line with RFEM 6 and RSTAB 9, using our WebService makes the engineer's work easier and faster. Check it out now! This tutorial shows you how to use the C# library by means of a simple example.

KB 001851 | Two-Hinged Frame with Individual Pin-Ended Column in Plane

The modal relevance factor is a result of the linear stability analysis and qualitatively describes the degree of participation of individual members in a specific mode shape.

Screenshots

Timber Beam Ceiling

Hall

Stability of Arch Structure

Timber Arch Structure

Timber Building

Cross-Laminated Timber Plate with Point Supports and Deformation in RFEM 6 | © ATP Architects Ingenieure

Timber Structure of Lookout Tower

This image shows a user interface of the RFEM 6 software, which is used for the structural analysis and design. In the main area of the interface, there is a complex 3D model of a timber structure, presented in two different styles: before and after the deformation.

Global Deformation – Before and After Position of Timber Structure Due to Wind Forces in RFEM 6 | Knies Magician's Hat in Rapperswil, Switzerland © Ghisleni Partner AG

Global Deformation of Timber Structure Due to Wind Forces in RFEM 6 | Knies Magician's Hat in Rapperswil, Switzerland © Ghisleni Partner AG

Product Features

9 Languages Available in RWIND Simulation

The RWIND Simulation program for generating wind loads based on CFD can be utilized in different languages; for example, in:

German
English
Czech
Spanish
French
Italian
Polish
Portuguese
Russian

Activation of Camera Flight Mode in RFEM

With the Camera Fly Mode view option, you can fly through your RFEM and RSTAB structure. Control the direction and speed of the flight with your keyboard. Additionally, you can save the flight through your structure as a video.

Defining Load Eccentricity for Uniform Member Load

You can define eccentricities for member loads of the load type 'Force'. You can apply the load eccentricities by means of an absolute or relative offset.

We recommend using the large deformation analysis to consider all effects of eccentric loads.

Using the "Beam Panel" thickness type, you can model timber panel elements in 3D space. You just specify the surface geometry and the timber panel elements are generated using an internal member-surface construct, including the simulation of the connection flexibility.

Go to Explanatory Video

Frequently Asked Questions (FAQ)

What calculation is carried out for the NDS Strength Configuration "Calculation of Torsion" options?

Which Dlubal software products do you recommend for the structural analysis and design of timber structures in particular?

How can I model a timber beam with stiffening on both sides? (splice)

How can I generate an area load on members via cells in RFEM 6 or RSTAB 9?

Which programs do I need for laminate and sandwich structures, or cross-laminated timber (CLT)?

Which Dlubal Software programs can I use to calculate and design timber structures?

Recommended Products for You

RFEM 6 | Main Program RFEM 6

RFEM 6

Main Program

The new generation of 3D FEA software is used for the structural analysis of members, surfaces, and solids.

Price of First License 4,170.00 USD

RFEM 6 | Design

Timber Design for RFEM 6

Add-On

The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.

Price of First License 1,930.00 USD

RFEM 6 | Additional Analysis

Structure Stability for RFEM 6

Add-On

The Structure Stability add-on performs stability analysis of structures. It determines critical load factors and the corresponding stability modes.

Price of First License 1,300.00 USD

RSTAB 9 | Main Program RSTAB 9

RSTAB 9

Structural Frame and Truss Analysis Software

Main Program

The modern 3D structural analysis and design program is suitable for the structural and dynamic analysis of beam structures as well as the design of concrete, steel, timber, and other materials.

Price of First License 2,910.00 USD

RSTAB 9 | Design

Timber Design for RSTAB 9

Add-On

The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.

Price of First License 1,930.00 USD

RX-TIMBER 2 | Timber Structures

RX-TIMBER Glued-Laminated Beam 2