1235x
004206
2020-01-07

Question

What is the meaning of "Shear failure in glued contact surface" in the details of the RF‑LAMINATE add-on module?


Answer:
In the case of cross-laminated timber plates that are not bonded on the narrow sides and a wall-like structural behavior, the torsion stress in the glued joints is often governing. This design is performed according to the explanations in the literature source given below, using the following equation.

$\eta_x=\frac{\tau_{tor,x}}{f_{v,tor}}+\frac{\tau_x+\tau_{xz}}{f_R}=\frac{\displaystyle\frac{3\ast n_{xy}}{b(n-1)}}{f_{v,tor}}+\frac{{\displaystyle\frac{\frac{\partial n_x}{\partial x}}{n-1}}+\tau_{xz}}{f_R}\leq1$

where
  • b is the board width,
  • n is the number of board layers,
  • nxy is the shear in the layer plane,
  • $\frac{\partial n_x}{\partial x}$ is the shear of board layers,
  • $\tau_{xz}$ is the shear in the thickness direction,
  • fR is the rolling shear strength,
  • fv,tor is the torsional shear strength.
For the y-direction, the design is similar, but using the values for the y‑direction.