FAQ 002413 EN-US 02/14/2019

Markus Baumgärtel Add-on Modules CONCRETE RF-CONCRETE

How can I define a fixed ironing distance of, for example, 15cm and 30cm in CONCRETE or RF-CONCRETE rods?

Answer

This setting can be found in RF-CONCRETE Members in the dialog "1.6 Reinforcement - bracket" (see Figure 1).

You can also specify custom ironing distances under "Defined ironing distances". So for example 150 mm and 300 mm. With the following specification, only these distances are used for the design of the stirrup reinforcement.

  1. To do this, first click on the "Defined ironing distances" button (see Figure 2).

  2. Then you insert the available distances in the dialog "New list of possible distances between stay / bar". For example, 0.150 and 0.300. Then you give this new list a unique list name eg "Only 150 and 300 mm" (see Figure 3).

  3. Subsequently, this list of distances for design in RF-CONCRETE Members can be selected (see Figure 4).


Keywords

Defined ironing distances ironing distances

Reference

Contact us

Contact Dlubal Software

Did you find your question?
If not, contact us via our free e-mail, chat, or forum support, or send us your question via the online form.

(267) 702-2815

info-us@dlubal.com

RSTAB Concrete Structures
CONCRETE 8.xx

Add-on Module

Linear and nonlinear analysis of reinforced concrete members with reinforcement concept

Price of First License
810.00 USD
RFEM Concrete Structures
RF-CONCRETE 5.xx

Add-on Module

Design of reinforced concrete members and surfaces (plates, walls, planar structures, shells)

Price of First License
810.00 USD