Pro vyhodnocení lze použít i pracovní okno programu RFEM.
The RFEM work window in the background helps in finding the location of an FE node or grid point in the model: An arrow in the background graphic indicates the point selected in the result window of RF-CONCRETE Surfaces; the surface is highlighted in the selection color.
If you cannot improve the display by moving the RF-CONCRETE Surfaces window, click the [Jump to graphic] button to activate the view mode: The program hides the window so that you can adjust the view in the RFEM work window. The view mode provides the functions of the View menu, such as zooming, moving, or rotating the view. Šipka, která vyznačuje rozhodující místo x na prutu, přitom nezmizí.
To return to RF-CONCRETE Surfaces, click [Back].
You can also check the reinforcements and design ratios graphically on the RFEM model: Kliknutím na tlačítko [Grafika] lze opustit návrhový modul. The work window of RFEM now displays all design results such as the internal forces of a load case.
The Results navigator is adjusted to the RF-CONCRETE Surfaces module: You can graphically display the results of the longitudinal reinforcements for each reinforcement direction and layer, the shear reinforcement, the design internal forces, or the ratios and detailed results of the serviceability limit state designs.
Analogous to the display of internal forces, the [Show Results] button shows or hides the display of the design results.
Since the RFEM tables serve no function for the evaluation of the design results, they can be hidden.
Návrhové stavy se dají nastavit v seznamu hlavní nabídky programu RFEM
Pro vyhodnocení je k dispozici barevný panel s obvyklými možnostmi ovládání. Funkce jsou popsány v Kapitole 3.4.6 v příručce RFEM. In the second tab, you can set the Display Factors for the reinforcements, internal forces, or design ratios. The third tab of the panel allows you to display the results of selected surfaces (see chapter 9.9.3 of the RFEM manual).
You can use all options provided by RFEM to display the result values of the reinforcements and design ratios on the surfaces. These functions are described in chapter 9.4 of the RFEM manual. The following figure shows the Bottom (+z) Reinforcement group that must be placed in addition to the basic reinforcement. The values are respectively applied in reinforcement direction 1 and 2.
You can transfer the graphics of the design results into the printout report (see chapter 7.2).
To return to the add-on module, click the [RF-CONCRETE Surfaces] panel button.