Back
1059x
000155
2024-03-01

Calculation and verification of aluminum structures according to EC 9 | Part 2: structural analysis, verifications and calculation report

Calculation and verification of aluminum structures according to EC 9 | Part 2: structural analysis, verifications and calculation report
2018-01-18
Free

Duration: 36:28 min.

  • Calculation of an aluminum structure
  • Consideration of the heat affected zones HAZ
  • Strength checks, stability checks, limit state checks
  • Printout report
    • Time Schedule
    00:00
    Design on the overall model
    • Stability design
    • Export of stiffnesses
    01:32
    Structural analysis of an aluminum structure
    06:22
    Verification of aluminum members in RF ‑ ALUMINUM
    12:35
    Thermally altered areas
    15:13
    Practical Example 1: Response spectrum analysis
    20:03
    Practical Example 1: Response spectrum analysis
    26:03
    Printout report
    33:09
    Conclusions

    Dr. Eng. Fabio Borriello

    CEO of Dlubal Software Srl & Support/Sales Manager

    Fabio is in charge of technical and commercial management of the Italian branch office of Dlubal Software. He also provides technical support and sales assistance, and contributes to the continuous development of the programs for the Italian market.

    Location

    Online
    Events
    2024-04-30
    Online Training | English
    EN-GB | Flag Online Training
    RFEM 6 | Students | Introduction to Timber Design
    2024-05-02
    Construction Stages in Membrane Structures with RFEM 6
    EN-GB | Flag Webinar
    Construction Stages in Membrane Structures with RFEM 6
    2024-05-08
    Online Training | English
    EN-GB | Flag Online Training
    RFEM 6 | Students | Introduction to Reinforced Concrete Design
    2024-05-08
    Cross-Section Modeling and \n Stress Analysis in RSECTION 1
    EN-GB | Flag Webinar
    Cross-Section Modeling and Stress Analysis in RSECTION 1
    2024-05-15
    Online Training | English
    EN-GB | Flag Online Training
    RFEM 6 | Students | Introduction to Steel Design
    2024-05-16
    Consideration of Construction Stages in RFEM 6
    EN-GB | Flag Webinar
    Consideration of Construction Stages in RFEM 6
    2024-05-23
    Most Frequently Asked Questions Answered by Dlubal Support Team
    EN-GB | Flag Webinar
    Most Frequently Asked Questions Answered by Dlubal Support Team | May 2024
    2024-05-29
    Steel Structures in RFEM 6 \n Part 1: Modeling, Load Input
    EN-GB | Flag Webinar
    Modeling and Design of Steel Structures in RFEM 6 | Part 1: Modeling, Load Input
    2024-06-06
    Steel Structures in RFEM 6 \n Part 2: Combinations, Design, Documentation
    EN-GB | Flag Webinar
    Modeling and Design of Steel Structures in RFEM 6 | Part 2: Combinations, Design, Documentation
    2024-06-20
    Most Frequently Asked Questions Answered by Dlubal Support Team
    EN-GB | Flag Webinar
    Most Frequently Asked Questions Answered by Dlubal Support Team | June 2024
    2024-10-16
    Online Training | English
    EN-GB | Flag Online Training
    RFEM 6 | Students | Introduction to Member Design
    2024-10-23
    Online Training | English
    EN-GB | Flag Online Training
    RSECTION 1 | Students | Introduction to Strength of Materials
    Videos
    FAQ|003361
    EN-US | Flag FAQ
    FAQ 003361 | I need to define different types of lateral intermediate restrains for a single elem...
    Length: 00:00:45 min
    EN-US | Flag Product Feature
    Phase Sections in Construction Stages Analysis (CSA) Add-on
    Length: 00:00:33 min
    EN-US | Flag Product Feature
    Line Hinges for Rigid Links
    Length: 00:00:41 min
    EN-US | Flag Product Feature
    Punching Shear Design for All Section Shapes
    Length: 00:00:45 min
    EN-US | Flag General
    Dynamic and Seismic Analysis of Structures | RFEM 6 & RSTAB 9 by Dlubal Software
    Length: 00:00:00 min
    EN-US | Flag Event
    Webinar | AISC 360-22 Steel Connection Design in RFEM 6
    Length: 00:00:00 min
    EN-US | Flag Event
    RFEM 6 for Students | Introduction to FEM | Apr 24, 2024
    Length: 00:00:00 min
    FAQ 005494 | How can I model a timber beam with stiffening on both sides? (splice)
    EN-US | Flag FAQ
    FAQ 005494 | How can I model a timber beam with stiffening on both sides? (splice)
    Length: 00:01:22 min
    Stiffening Design in RFEM 6 Using Building Model
    EN-US | Flag Event
    Webinar | Stiffening Design in RFEM 6 Using Building Model
    Length: 00:00:00 min
    Models to Download
    3D Scaffolding Model in RFEM (© PlusEight System AB)
    2166x
    Scaffolding Structure
    Model 004869 | Floor Panels for Multi-Story Structure
    101x
    6x
    Floor panels for multi-storey construction
    Model 004864 | Steel Structure Connection | AISC 360-22
    149x
    19x
    Steel Structure Connection | AISC 360-22
    Model 004865 | Multi-Story Building
    101x
    14x
    Multi-storey building
    Model 004859 | Steel Structure | AISC 360/341-22
    266x
    40x
    Steel Structure | AISC 360/341-22
    P-Delta RSA Model
    89x
    5x
    Steel Member RSA | ASCE 7 and NBC
    Column Base Deformations
    3257x
    227x
    Steel Structure Column Base
    Model 004853 | Crossing Steel Pipes
    189x
    5x
    Crossing Steel Pipes
    Model 004854 | Wall Structure
    172x
    5x
    Wall Structure
    Knowledge Base Articles
    KB 001880 | Design of Cable Structures in RFEM 6 and RSTAB 9
    In this article, you will learn how to model and design cable structures in RFEM 6 or RSTAB 9.
    KB 001879 | Influence of Bending Stiffness of Cables
    This article describes and explains the influence of bending stiffness of cables on their internal forces. Furthermore, the text provides information on how this influence can be reduced.
    KB 001877 | ASCE 7-22 and NBC 2020 Seismic P-Delta Considerations in RFEM 6
    The ASCE 7-22 Standard [1], Sect. 12.9.1.6 specifies when P-delta effects should be considered when running a modal response spectrum analysis for seismic design. In the NBC 2020 [2], Sent. 4.1.8.3.8.c gives only a short requirement that sway effects due to the interaction of gravity loads with the deformed structure should be considered. Therefore, there may be situations where second-order effects, also known as P-delta, must be considered when carrying out a seismic analysis.
    Modal Analysis | Steel Structure
    This article presents the basic concepts in structural dynamics and their role in the seismic design of structures. Great emphasis is given to explaining the technical aspects in an understandable way, so that readers without deep technical knowledge can gain an insight into the subject.
    Screenshots
    "Edit Fire Resistance Configuration" Dialog Box for Steel Design
    "Edit Fire Resistance Configuration" Dialog Box for Steel Design
    Dialog Box "Edit Serviceability Configuration" for Steel Design
    Dialog Box "Edit Serviceability Configuration" for Steel Design
    "Edit Ultimate Limit State Configuration" dialog box for Steel Design
    "Edit Ultimate Limit State Configuration" dialog box for Steel Design
    'Thickness' table for stress-strain analysis
    'Thickness' table for stress-strain analysis
    Table 'Sections' for stress-strain analysis
    Table 'Sections' for stress-strain analysis
    RFEM 6 results - Time behaviour of the deformation ux
    RFEM 6 results - Time behaviour of the deformation ux
    Customer Review | RFEM and CRANEWAY to Maximize Opportunities and Grow Our Business
    Customer Review | RFEM and CRANEWAY to Maximize Opportunities and Grow Our Business
    Knowledge Base | Key Elements of Structural Dynamics
    Knowledge Base | Key Elements of Structural Dynamics
    Customer Project | Production and Storage Facility for Pastries, France
    Customer Project | Production and Storage Facility for Pastries, France
    Product Features
    Feature 002808 | Independent FE Mesh

    Use the "Independent mesh preferred" option in the FE mesh settings to create an independent FE mesh for the integrated objects. This allows you to generate a significantly more detailed and precise FE mesh for individual objects that are integrated into one another.

    Feature 002807 | 3D Display of FSM Results

    In the "Edit Section" dialog box, you can display the buckling shapes of the Finite Strip Method (FSM) as a 3D graphic.

    Feature 002806 | Visual Objects

    In RFEM 6 and RSTAB 9, you have the option to enter "Visual Objects" as guide objects. You can import the file formats 3ds, stl, and obj.

    These objects allow you to create a better reference to the dimensions.

    Feature 002801 | Punching Shear Design for All Section Shapes

    Do you have individual column sections and angled wall geometries, and need punching shear design for them?

    No problem. In RFEM 6, you can perform punching shear design not only for rectangular and circular sections, but for any cross-section shape.

    Frequently Asked Questions (FAQ)
    I am trying to design an open, unsymmetric aluminum cross-section in RF‑/ALUMINUM and I am get the warning "Non-designable - 1022) General cross-section — Check of stability is not available". What is the reason?
    I need to define different types of lateral intermediate restrains for a single element in RF-/STEEL EC3. Is this possible?
    Which Dlubal software products do you recommend for the structural analysis and design of timber structures in particular?
    How do I reset the display settings to default?
    Why are the maximum deformations not displayed?
    What is the difference between the RANS, URANS, and DDES turbulence models?
    Customer Projects
    Exterior View of Pastry Production and Storage Unit | © GH HERVOUET
    Creation of a production and storage facility for pastries in Montbert, France
    Pedestrian and Cyclist Bridge "Herzogsteg" in Eichstätt, Germany | © Bruno Klomfar
    Pedestrian and Cyclist Bridge "Herzogsteg" in Eichstätt, Germany
    Lighted Toll Station | © Mr. Yunchao Ding, Jiangsu Jingong Space Structure Co., Ltd.
    Dawang Toll Station in Shaanxi, China
    RFEM Model of High-Bay Racking with Deformation Results
    High-Bay Racking, China
    Multi-Energy Station (© GH HERVOUET)
    Multi-Energy Station in Les Sables-d'Olonne, France
    Front View of Office Building with V-Shaped Steel Composite Columns | © Die Tragwerker GmbH
    Office Building with Integrated Visitor Center and Parking Garage in Geiselbulach, Germany
    Model of Gym | © BET Moselle Bois
    Metz Gym as Showcase of Engineering and Sustainability in Modern Construction, Metz, France
    Steel Pergola at Rafael Landívar University (© Eng. Enrique de León)
    Steel Pergola in Plaza del Edificio L, Rafael Landívar University, Guatemala
    Radar Tower on Left (© SAQQARA Ingeniería)
    Structural Analysis of Radar Tower at Malaga Airport, Spain
    Recommended Products for You
    RFEM 6 | Main Program RFEM 6
    RFEM 6
    Hall with Arched Roof
    RFEM | Product Category Icon Main Program

    The new generation of 3D FEA software is used for the structural analysis of members, surfaces, and solids.

    Price of First License 4,170.00 USD
    RFEM 6 | Additional Analysis
    Structure Stability for RFEM 6
    Structure Stability
    RFEM | Product Category Icon Add-On

    The Structure Stability add-on performs stability analysis of structures. It determines critical load factors and the corresponding stability modes.

    Price of First License 1,300.00 USD
    RFEM 6 | Additional Analysis
    Construction Stages Analysis (CSA) for RFEM 6
    RF-STAGES
    RFEM | Product Category Icon Add-On

    The Construction Stages Analysis (CSA) add-on allows for considering the construction process of structures (member, surface, and solid structures) in RFEM.

    Price of First License 1,570.00 USD
    RFEM 6 | Additional Analysis
    Torsional Warping (7 DOF) for RFEM 6
    Rod Warping Torsion
    RFEM | Product Category Icon Add-On

    The Torsional Warping (7 DOF) add-on allows you to consider cross-section warping as an additional degree of freedom when calculating members.

    Price of First License 1,480.00 USD
    RFEM 6 | Design
    Stress-Strain Analysis for RFEM 6
    Belt Connection, Stress
    RFEM | Product Category Icon Add-On

    The Stress-Strain Analysis add-on performs general stress analysis by calculating the existing stresses and comparing them with the limit stresses.

    Price of First License 1,210.00 USD
    RFEM 6 | Design
    Concrete Design for RFEM 6
    Rendering Reinforcement Bars
    RFEM | Product Category Icon Add-On

    The Concrete Design add-on allows for various design checks according to international standards. You can design members, surfaces, and columns, as well as perform punching and deformation analyses.

    Price of First License 2,550.00 USD
    RFEM 6 | Design
    Steel Design for RFEM 6
    Add-on "Steel Design"
    RFEM | Product Category Icon Add-On

    The Steel Design add-on performs the ultimate and serviceability limit state design checks of steel members according to various standards.

    Price of First License 2,550.00 USD
    RFEM 6 | Design
    Timber Design for RFEM 6
    Timber Structure
    RFEM | Product Category Icon Add-On

    The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.

    Price of First License 1,930.00 USD
    RFEM 6 | Design
    Masonry Design for RFEM 6
    Masonry Design
    RFEM | Product Category Icon Add-On

    The Masonry Design add-on for RFEM allows you to design masonry using the finite element method. It was developed as part of the research project titled DDMaS – Digitizing the Design of Masonry Structures. The material model represents the nonlinear behavior of the brick-mortar combination in the form of macro-modeling.

    Price of First License 1,660.00 USD
    RFEM 6 | Design
    Aluminum Design for RFEM 6
    Aluminum Structure, Deformation
    RFEM | Product Category Icon Add-On

    The Aluminum Design add-on performs the ultimate and serviceability limit state design checks of aluminum members according to various standards.

    Price of First License 1,750.00 USD
    RFEM 6 | Joints
    Steel Joints for RFEM 6
    Steel Joints for RFEM 6
    RFEM | Product Category Icon Add-On

    The Steel Joints add-on for RFEM allows you to analyze steel connections using an FE model. The FE model is generated automatically in the background and can be controlled via the simple and familiar input of components.

    Price of First License 2,110.00 USD
    RSTAB 9 | Main Program RSTAB 9
    RSTAB 9
    Structural Frame and Truss Analysis Software
    RSTAB | Product Category Icon Main Program

    The modern 3D structural analysis and design program is suitable for the structural and dynamic analysis of beam structures as well as the design of concrete, steel, timber, and other materials.

    Price of First License 2,910.00 USD
    RSTAB 9 | Additional Analysis
    Structure Stability for RSTAB 9
    Structure Stability
    RSTAB | Product Category Icon Add-On

    The Structure Stability add-on performs the stability analysis of structures. It determines critical load factors and the corresponding stability modes.

    Price of First License 1,300.00 USD
    RSTAB 9 | Additional Analysis
    Torsional Warping (7 DOF) for RSTAB 9
    Rod Warping Torsion
    RSTAB | Product Category Icon Add-On

    The Torsional Warping (7 DOF) add-on allows for considering cross-section warping as an additional degree of freedom when calculating members.

    Price of First License 1,480.00 USD
    RSTAB 9 | Design
    Stress-Strain Analysis for RSTAB 9
    Belt Connection, Stress
    RSTAB | Product Category Icon Add-On

    The Stress-Strain Analysis add-on performs a general stress analysis by calculating the existing stresses and comparing them to the limit stresses.

    Price of First License 1,120.00 USD
    RSTAB 9 | Design
    Concrete Design for RSTAB 9
    Rendering Reinforcement Bars
    RSTAB | Product Category Icon Add-On

    Concrete Design add-on allows for various design checks of members and columns according to international standards.

    Price of First License 2,550.00 USD
    RSTAB 9 | Design
    Steel Design for RSTAB 9
    Add-on "Steel Design"
    RSTAB | Product Category Icon Add-On

    The Steel Design add-on performs the ultimate and serviceability limit state design checks of steel members according to various standards.

    Price of First License 2,550.00 USD
    RSTAB 9 | Design
    Timber Design for RSTAB 9
    Timber Structure
    RSTAB | Product Category Icon Add-On

    The Timber Design add-on performs the ultimate, serviceability, and fire resistance limit state design checks of timber members according to various standards.

    Price of First License 1,930.00 USD
    RSTAB 9 | Design
    Aluminum Design for RSTAB 9
    Aluminum Structure, Deformation
    RSTAB | Product Category Icon Add-On

    The Aluminum Design add-on performs the ultimate and serviceability limit state design checks of aluminum members according to various standards.

    Price of First License 1,750.00 USD
    Display Product Family