31x

004286

0001-01-01

Select Manual

Overview

1 Introduction

1.1 New Features in RFEM 5
1.2 Program Capacity
1.3 Company Profile
1.4 Using the Manual

2 Installation

2.1 System Requirements
2.2 Installation Process

3 User Interface

3.1 Overview
3.2 Terminology
3.3 Special Terms in RFEM
3.4 RFEM User Interface

5 Load Cases and Combinations

5.1 Load Cases
5.2 Actions
5.3 Combination Expressions
5.4 Action Combinations
5.5 Load Combinations
- 5.5.1 User-Defined Combinations
- 5.5.2 Generated Combinations
5.6 Result Combinations
- 5.6.1 User-Defined Combinations
- 5.6.2 Generated Combinations
5.7 Combination Scheme

6 Loads

6.1 Nodal Loads
6.2 Member Loads
6.3 Line Loads
6.4 Surface Loads
6.5 Solid Loads
6.6 Free Concentrated Loads
6.7 Free Line Loads
6.8 Free Rectangular Loads
6.9 Free Circular Loads
6.10 Free Polygon Loads
6.11 Free Variable Loads
6.12 Imposed Nodal Deformations
6.13 Imposed Line Displacements
6.14 Imperfections
6.15 Generated Loads

8 Results

8.1 Nodes - Support Forces
8.2 Nodes - Deformations
8.3 Lines - Support Forces
8.4 Members - Local Deformations
8.5 Members - Global Deformations
8.6 Members - Internal Forces
8.7 Members - Contact Forces
8.8 Members - Strains
8.9 Members - Coefficients for Buckling
8.10 Member Slendernesses
8.11 Sets of Members - Internal Forces
8.12 Cross-Sections - Internal Forces
8.13 Surfaces - Local Deformations
8.14 Surfaces - Global Deformations
8.15 Surfaces - Basic Internal Forces
8.16 Surfaces - Principal Internal Forces
8.17 Surfaces - Design Internal Forces
8.18 Surfaces - Basic Stresses
8.19 Surfaces - Principal Stresses
8.20 Surfaces - Other Stresses
8.21 Surfaces - Contact Stresses
8.22 Surfaces - Equivalent Stresses - von Mises
8.23 Surfaces - Equivalent Stresses - Tresca
8.24 Surfaces - Equivalent Stresses - Rankine
8.25 Surfaces - Equivalent Stresses - Bach
8.26 Surfaces - Basic Strains
8.27 Surfaces - Principal Strains
8.28 Surfaces - Maximum Strains
8.29 Surfaces - Strains - von Mises
8.30 Surfaces - Strains - Tresca
8.31 Surfaces - Strains - Rankine
8.32 Surfaces - Strains - Bach
8.33 Solids - Deformations
8.34 Solids - Stresses
8.35 Solids - Strains
8.36 Solids - Gas Pressure

10 Printout

10.1 Printout Report
10.2 Direct Graphic Printout

11 Program Functions

11.1 General Functions
11.2 Selection
- 11.2.1 Selecting Objects Graphically
- 11.2.2 Selecting Objects by Criteria
11.3 Work Window
11.4 Editing Objects
11.5 Table Functions
11.6 Parametrized Input
11.7 Model Generators
- 11.7.1 Copies and Extrusions
  
  11.7.1.1 Parallel offset of lines and members
  
  11.7.1.2 Extruding lines and members
  
  11.7.1.3 Extruding surfaces
  
  11.7.1.4 Generating solids
  
  11.7.1.5 Splitting members into surfaces
- 11.7.2 Model Generators
  
  11.7.2.1 Members
  
  11.7.2.2 Surfaces
11.8 Load Generators

13 Literature

8.2 Nodes - Deformations

To control the graphical display of nodal displacements and nodal rotations, select the Global Deformations check box in the Results navigator. Table 4.2 shows the deformations of nodes in numerical form.

Image 8.8 *Results* navigator: Global Deformations

Image 8.9 Table 4.2 *Nodes - Deformations*

The displacements and rotations are listed by nodes.

Displacements / Rotations

The deformations have the following meanings:

Table 8.1 Nodal deformations
\|u\|	Absolute value of total displacement
u_X	Displacement in direction of the global axis X
u_Y	Displacement in direction of the global axis Y
u_Z	Displacement in direction of the global axis Z
φ_X	Rotation about the global axis X
φ_Y	Rotation about the global axis Y
φ_Z	Rotation about the global axis Z

Parent section

8 Results